Overview
The ICON Vehicle Dynamics ICO91722 is a front 2.5 VS IR coilover kit for the 2021 to 2026 Ford F-150 4WD. ICON rates it for 0 to 2.75 inches of lift height adjustability over stock, which lets 4WD trucks run larger, more aggressive wheel and tire combinations.
The coilovers use a 2.5-inch shock body with a larger piston area than stock components, which improves damping and ride quality across rough terrain. The vehicle-specific valving is tuned for the F-150 and gives a sport feel on and off the pavement.
Key features
- 0 to 2.75 inches of lift height adjustability over stock
- 2.5-inch shock body with increased piston area over stock
- Vehicle-specific valving tuned for on- and off-road driving
- Eyelet bottom mount and OEM top mount
- Gas charged design
- ICON recommends pairing with rear 2.0 Aluminum Series or 2.5 Series shocks
Off-road use and wheel fitment
A 4WD F-150 used on trails sees repeated compression and rebound, so the front shocks carry a steady workload. Keeping the damping in good shape means watching for oil seepage, worn bushings and bent mounts after each trip. Larger tires increase the load on the coilovers and the steering, so check the wheel bearings and tie rod ends when a bigger tire package is fitted.
When choosing wheels and tires, measure clearance at full steering lock and at full compression before the truck is driven hard. Backspacing and offset decide how close the tire sits to the inner fender and the coilover body. Re-check the lug torque after the first few miles, and keep the dust boots clean so grit does not score the shaft during off-road use.
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO91722 |
| Shock series | 2.5 Coilover |
| Body diameter | 2.5 inches |
| Top mount | OEM |
| Bottom mount | Eyelet |
| Lift range | 0 to 2.75 inches over stock |
| Hydraulic or gas charged | Gas charged |
| Location and position | Front |
| Fitment type | Direct fit |
| Vehicle | Ford F-150 4WD, 2021 to 2026 |
Vehicle fitment
The kit fits the 2021 to 2026 Ford F-150 4WD across the King Ranch, Lariat, Limited, Platinum, Police Responder, SSV, Tremor, XL and XLT trims.
Tremor trucks are listed with a smaller lift range of 0 to 1.25 inches over stock. The kit is not compatible with models equipped with the continuous control damping system. Confirm your vehicle’s year, model and trim before ordering.
Wheel and tire notes
Factory wheels and tires fit. Recommended aftermarket wheels are 17 by 8.5 inches with a 5-inch backspace and 6mm offset, 18 by 9 inches with a 5.25-inch backspace and 6mm offset, and 20 by 9 inches with a 5.625-inch backspace and 16mm offset. The recommended tire is 33 by 11.50 inches, and larger tires may need fender trimming.
What’s included
The kit is a front coilover set with eyelet bottom mounts and OEM top mounts. Check the package contents against your installation before starting.