Overview
The ICON Vehicle Dynamics ICO91717 is a front 2.5 VS IR coilover kit for the 2021 to 2026 Ford F-150 2WD. It replaces the front shocks with 2.5-inch gas charged coilovers that ICON rates for 0 to 3 inches of lift adjustability over stock, which allows larger wheel and tire combinations.
The vehicle-specific valving is tuned for a sport feel on and off the road. The larger shock body and increased piston area over stock components improve damping and ride across different terrain. Pairing the front coilovers with rear 2.0 Aluminum Series or 2.5 Aluminum Series shocks keeps front and rear control balanced.
Key features
- Vehicle-specific valving tuned for on- and off-road driving
- 0 to 3 inches of lift height adjustability over stock
- 2.5-inch shock body with increased piston area
- Eyelet bottom mount and OEM top mount
- Gas charged design
Lift, tires and rear balance
Raising a 2WD F-150 changes how the front suspension and steering geometry work, so the lift should be chosen with the wheel and tire package in mind. Larger tires add rotating weight and can rub at full compression, which is where fender trimming often comes in. Check clearance at both steering lock and full suspension travel once the truck is assembled.
Front and rear damping work as a pair, so a stiff front end with a soft rear can make the truck pitch and feel loose. Replacing rear shocks at the same time keeps the balance even. Inspect the eyelet bottom mount and the OEM top mount regularly, and look for oil seepage or cracked bushings. Re-check torque after the first few drives to keep the mounts secure.
Specifications
| Brand | ICON Vehicle Dynamics |
|---|---|
| Part number | ICO91717 |
| Shock series | 2.5 Coilover |
| Body diameter | 2.5 inches |
| Top mount | OEM |
| Bottom mount | Eyelet |
| Lift range | 0 to 3 inches over stock |
| Hydraulic or gas charged | Gas charged |
| Fitment type | Direct fit |
| Vehicle | Ford F-150 2WD, 2021 to 2026 |
Vehicle fitment
The kit fits the 2021 to 2026 Ford F-150 across the King Ranch, Lariat, Limited, Platinum, Police Responder, SSV, Tremor, XL and XLT trims, and it is written for 2WD trucks.
The kit is not compatible with models equipped with the continuous control damping system, and Tremor trucks have a smaller lift range of 0 to 1.25 inches over stock. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Models with dynamic bending headlamps also need ICON part 611071. Recommended tires are 33 by 11.50 inches. Larger tires may fit but need fender trimming and modifications.
Wheel and tire notes
ICON lists factory wheels and tires as fitting. Its recommended aftermarket wheels are 17 by 8.5 inches with a 5-inch backspace and 6mm offset, 18 by 9 inches with a 5.25-inch backspace and 6mm offset, and 20 by 9 inches with a 5.625-inch backspace and 16mm offset.
What’s included
The kit is the front coilover set with eyelet bottoms and OEM top mounts. Check the package contents against your installation before starting.