Shock boots keep grit and water off a lifted shock's shaft and seal. How to size, vent and inspect one, when it can trap…
Shock Absorbers & Shock Accessories
Showing 157–168 of 902 resultsSorted by popularity
-
Shock Absorbers & Shock Accessories
Rough Country GM Front Adjustable Vertex Remote Reservoir Coilovers (2″ Lift) – 689016
Shock Absorbers & Shock AccessoriesRough Country GM Front Adjustable Vertex Remote Reservoir Coilovers (2″ Lift) – 689016
- Rough Country 2 inch front adjustable Vertex remote reservoir coilover for the 2007 to 2018 Silverado 1500 and Sierra 1500
- 8-stage damping, 2.5-inch piston and nitrogen charge
- Bar pin bottom mount and gas charged design
- Part number 689016, with a 3-year warranty.
SKU: R/C689016 -
Shock Absorbers & Shock Accessories
Rough Country Front N3 Shocks – 23157_A
- Rough Country front N3 shock sold as a pair for 4WD Silverado and Sierra 1500 with 3.5 to 6.5 inch lift
- 10-stage variable valving with a 35mm piston and 18mm chromed rod
- 54mm body and high pressure nitrogen charge
- Part number 23157_A with a 3-year warranty.
SKU: R/C23157_A -
Suspension Strut Assembly
Rough Country Front 2″ Loaded Struts – 501126
- Rough Country front 2 inch N3 loaded strut for the 1995 to 2004 Toyota Tacoma
- Compressed length 14.61 inches and extended length 19.88 inches
- Gas charged with a pre-installed coil spring
- Part number 501126, with a 3-year Limited Warranty
SKU: R/C501126 -
Shock Absorbers & Shock Accessories
Rough Country Ford Front Adjustable Vertex Reservoir Shocks – 699004
Shock Absorbers & Shock AccessoriesRough Country Ford Front Adjustable Vertex Reservoir Shocks – 699004
- Rough Country front adjustable Vertex reservoir shock for the 2005 to 2022 Ford F-250 Super Duty
- 8-stage adjustable damping with a 2.5-inch piston and 22mm chrome hardened rod
- Nitrogen charged monotube with external reservoir
- Part number 699004, with a 3-year warranty
SKU: R/C699004 -
-
-
Suspension Strut Assembly
Rough Country 6″ Dodge Lifted N3 Struts – 501026
- Rough Country 6 inch Dodge lifted N3 front strut for the 2012 to 2018 Ram 1500 and 2019 to 2024 Ram 1500 Classic
- Only fits models with 6 inches of lift
- Cannot be installed with a strut spacer
- Part number 501026, with a 3-year Limited Warranty
SKU: R/C501026 -
Suspension Strut Assembly
Rough Country 3.5″ GM Lifted N3 Struts – 501084
- Rough Country 3.5 inch GM lifted N3 front strut for 2007 to 2014 Chevrolet and GMC trucks and SUVs
- Only fits models with 3.5 inches of lift; not for 2007 Classic models
- Cannot be installed with a strut spacer
- Part number 501084
SKU: R/C501084 -
Suspension Strut Assembly
Rough Country 3″ Lifted N3 Front Struts – 501101
- Rough Country 3 inch lifted N3 front strut for the 2010 to 2020 and 2022 Toyota 4Runner
- Stem top and eyelet bottom mounts, gas charged
- Pre-installed coil spring for installation without strut disassembly
- Part number 501101, with a 3-year Limited Warranty
SKU: R/C501101 -
Suspension Strut Assembly
Rough Country 3″ Ford Lifted N3 Struts – 501070
- Rough Country 3 inch front N3 lifted strut for the 2009 to 2013 Ford F-150
- Designed only for models with 3 inches of lift, to replace strut spacers on lifted trucks
- Gas charged, with a 3-year Limited Warranty
- Part number 501070
SKU: R/C501070 -
Suspension Strut Assembly
Rough Country 2″ GM Lifted N3 Struts – 501063
- Rough Country 2 inch lifted N3 strut for the 2014 to 2018 Chevrolet Silverado 1500 and GMC Sierra 1500
- Nitrogen charged with a pre-loaded coil, for installation without strut disassembly
- Cannot be installed together with a strut spacer
- Part number 501063, with a 3-year Limited Warranty
SKU: R/C501063 -
Shock Absorbers & Shock Accessories
Rough Country 2″ Front Adjustable Vertex Coilover Leveling Kit – 689012
Shock Absorbers & Shock AccessoriesRough Country 2″ Front Adjustable Vertex Coilover Leveling Kit – 689012
- Rough Country 2 inch front adjustable coilover leveling kit with 2.5-inch Vertex shocks for the 2014 to 2026 Ford F-150
- 8-stage adjustable damping and nitrogen charged monotube with external reservoir
- Carries a 3-year warranty.
- Part number 689012
SKU: R/C689012
What a shock absorber does
A spring supports the vehicle, but it is the shock absorber that controls how fast the spring moves. Without damping, a vehicle would keep bouncing after every bump. The shock converts that motion into heat by forcing fluid through valving, which keeps the tire planted and the body under control on washboard, ruts and highway seams.
Common shock designs
- Twin-tube: a compact design with an inner and outer tube. It is common on stock-style and light-duty replacements and generally rides smoothly.
- Monotube: a single tube with a separate gas chamber, usually nitrogen charged. It tends to resist fade better under repeated hard use, and larger bores such as 46mm move more fluid.
- Remote reservoir: adds an external reservoir for extra fluid volume and cooling, aimed at fast desert driving and heavy off-road use.
- Coilover and strut assemblies: combine the spring and damper in one unit, common on independent front suspension.
How to choose
Start with lift height, because a shock has to fit the travel your suspension actually has. Compare collapsed length and extended length against your vehicle's specifications; a shock that is too short can limit droop, and one that is too long can bottom out inside its travel. Many listings in this category are matched to a lift range, such as stock height to 1.5 inches or a 3 to 3.5 inch kit, so read that range closely.
Also note the position (front or rear), whether the shock is sold individually or as a set, the mount style (loop, stem or bolt-in), and whether the vehicle has air or electronic suspension, since shocks made for standard suspension generally do not apply to those systems.
Accessories and rebuild parts
Extension brackets, relocation brackets and mount kits help when a lift changes shock geometry or when a larger shock needs a different mounting position. Boots protect the shaft from dirt and rock chips, and rebuild kits replace worn internal wear items on serviceable shocks. Spherical bearings and spacers fit specific eye sizes, so match the bore and hardware to your existing shock.
Installation notes
Support the axle or frame safely before removing a shock, and replace worn bushings and hardware at the same time. Tighten fasteners to the torque specified by the vehicle or shock manufacturer, ideally with the suspension at ride height so the bushings do not bind. Replace shocks in pairs on the same axle for even handling. If you are changing lift height or the suspension geometry, professional installation and an alignment check are sensible. Always confirm fitment for your exact year, make and model before ordering.
Matching shocks to how you drive
A daily driver that sees mostly pavement and graded roads is usually happiest with a well-valved monotube or twin-tube shock that keeps the ride composed and quiet. A weekend trail rig that crawls over rocks benefits from a shock with enough stroke to let the axle droop, while a truck that runs fast across desert washboard may call for larger bodies and added fluid capacity. Heavy loads such as a camper, a winch bumper or a roof tent change the picture again, because added weight makes damping and spring rate more important. Think about your typical load before choosing, and remember that shocks do not replace springs: if the vehicle sags, the springs may need attention before any shock will feel right. Keep notes on your part numbers and the lift height they were chosen for, since that information makes future replacement much easier.
Related guides
- Shock Boots: Why Every Lifted Shock Needs One
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
Popular Shock Absorbers & Shock Accessories brands
- Pro Comp Suspension (198)
- Bilstein (151)
- ICON Vehicle Dynamics (92)
- FOX (87)
- Rancho (77)
- Rough Country (64)
- Fabtech (63)
- Skyjacker (53)
- ARB 4x4 Accessories (21)
- Rubicon Express (18)
- King Shocks (16)
- Trail Master (14)
Shop Shock Absorbers & Shock Accessories by type
- Suspension Strut Assembly (38)
- Shock Absorber Mount (13)
- Multi Shock Bracket (4)
- Shock Absorber Spherical Bearing (3)
- Shock Absorber Monoball Spacer (1)
- Shock Absorber Relocation Bracket (1)
Shock Absorbers & Shock Accessories FAQ
How do I know when shocks are worn out?
Common signs include a bouncy or floaty ride, nose dive under braking, uneven tire wear, fluid leaking down the shock body, and clunking from loose or worn bushings. A bounce test and a visual inspection help, and shocks wear gradually, so many owners replace them in pairs.
Do I need longer shocks after a lift?
Usually yes. A lift increases the distance between the axle and frame, so the shock needs enough extended length to avoid limiting travel. Compare collapsed and extended length with the lift range listed on the product page and with your vehicle's specifications.
What is the difference between monotube and twin-tube shocks?
A monotube uses one tube with a separate gas chamber and generally handles heat better during repeated hard use. A twin-tube uses an inner and outer tube and often rides more softly. The right choice depends on your driving and vehicle.
Are shock absorbers sold individually or in pairs?
It varies by product. Some listings are a single shock, others are a pair or a set for the whole vehicle. Check the sold-as detail on the product page, then confirm the quantity and position before choosing a part.










