Overview
The Rancho RS77328 is a rear RS7MT monotube shock for the 2007 through 2018 Jeep Wrangler (JK), in two-door and Unlimited four-door body styles. It fits models with a 0 to 2-inch lift.
The shock has a 2-inch monotube body, a bar pin at the top and an eyelet at the bottom. Its compressed length is 15.55 inches, its extended length is 23.86 inches, and its travel is 8.31 inches.
The RS7MT is a monotube shock made for off-road use. A hardened piston rod, an integrated dirt wiper and reduced fade support a steadier ride on and off road.
The integrated dirt wiper sealing system keeps dirt and debris out of the shock. The internal rebound bumper and shouldered rubber bushings reduce noise, vibration and ride harshness, while the PTFE-banded piston responds to changing road conditions.
Double-welded loops at stress areas and a double strength closure add strength, and the body has a hot form reserve tube. The full-floating dividing piston and high-pressure nitrogen gas reduce aeration and shock fade, and the design suits off-road use and larger wheel and tire packages.
Key features
- Rear monotube shock for a 0 to 2-inch lift
- 14 mm hardened chrome piston rod to resist scuffs and corrosion
- Large 2-inch monotube body with all-weather fluid
- Internal rebound bumper and shouldered rubber bushings
- Full-floating dividing piston with high-pressure nitrogen gas
- Black satin finish with Rancho red logo
Damping and rear axle control
Rear shocks control how quickly the axle settles after a bump and how much it moves under acceleration and braking. Damping that is too soft lets the rear bounce and float, while worn damping makes the vehicle feel loose at highway speeds. A monotube design keeps the oil under steady pressure, which helps it respond consistently across repeated hits.
Bushings matter as much as the shock body. Cracked or collapsed bushings let the shock move off its intended path and wear the eyelet or bar pin early. When replacing a rear shock, inspect the bushings and mounts together so the new unit is not working against worn hardware.
- Inspect bushings for cracks or collapse
- Check the bar pin and eyelet for play
- Look for oil residue along the body
- Keep the dirt wiper clear of packed debris
Specifications
| Brand | Rancho |
|---|---|
| Part number | RANRS77328 |
| Series | RS7MT |
| Position | Rear |
| Shock type | Monotube |
| Compressed length | 15.55 inches |
| Extended length | 23.86 inches |
| Travel | 8.31 inches |
| Body diameter | 2.0 inches |
| Top mount | Bar pin |
| Bottom mount | Eyelet |
Vehicle fitment
It is a rear shock for the 2007 through 2018 Jeep Wrangler (JK), in two-door and Unlimited four-door body styles.
The list does not include the Wrangler JL, the Gladiator or Wrangler years outside 2007 through 2018. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation needs no sleeves or extra hardware, because the mounting is application specific.
What’s included
The finish is black satin. Check the package contents against your installation before starting.









