Overview
The Rancho RS999201 is a front RS9000XL monotube shock for the 1984 through 1989 Toyota Land Cruiser.
The shock has an extended length of 18.45 inches and a collapsed length of 12.10 inches. It uses a 2.75-inch (70 mm) body and an 18 mm nitro-carburized rod, with nine-position tuning and a nitrogen gas charge. It has stem mounts at the top and bottom.
The nine-position manually adjustable series adds control on on-road and off-road trucks, SUVs and Jeeps. It comes with a protective boot, polyurethane bushings and a liquid metallic finish.
Key features
- Front monotube shock
- Nine-position tuning technology
- Large 18 mm nitro-carburized rod
- Nitrogen gas charged
- Polyurethane bushings
- Liquid metallic finish
- Protective boot included
Measuring length before buying
Length matters more than most shoppers expect on a Land Cruiser shock. A front unit has to fit between its mounts at both the collapsed and extended positions, so a small difference can leave the shock bound up or hanging loose. Measure the old unit from center to center of each stem mount, both fully compressed and fully extended, and write the numbers down before shopping.
Front shocks on these trucks work against the springs and steering geometry, so the damping shows up as steady control at highway speed and firmer feel on rough trails. Look for oil on the body, a torn boot, or a front end that keeps bouncing after a dip. Inspect the stem mount bushings at the same time, since worn bushings add play that a new shock cannot correct.
Specifications
| Brand | Rancho |
|---|---|
| Part number | RANRS999201 |
| Series | RS9000XL |
| Position | Front |
| Shock type | Monotube |
| Extended length | 18.45 inches |
| Collapsed length | 12.10 inches |
| Body diameter | 2.75 inches (70 mm) |
| Top and bottom mount | Stem |
Vehicle fitment
It fits the 1984 through 1989 Toyota Land Cruiser.
Model years from 1990 onward are outside this shock’s fit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The stem mounts at the top and bottom have to match the shock being replaced, so measure the extended and collapsed lengths of the old unit before ordering. Confirm the mount type on the old shock first.
What’s included
A protective boot is included with the shock.









