Select your vehicle

Rough Country Front 2″ Loaded Struts – 501126

Rough Country

$369.95In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 2:00 PM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rough Country front 2 inch N3 loaded strut for the 1995 to 2004 Toyota Tacoma
  • Compressed length 14.61 inches and extended length 19.88 inches
  • Gas charged with a pre-installed coil spring
  • Part number 501126, with a 3-year Limited Warranty

Description

Overview

The Rough Country 501126 is a front 2 inch N3 loaded strut for the 1995 to 2004 Toyota Tacoma. Its compressed length is 14.61 inches and its extended length is 19.88 inches. It is a gas charged, direct fit unit for the front position, part of the N3 Performance series and sold as a lift strut.

A loaded strut is a complete strut with the spring already fitted. It raises ride height while keeping a smooth, factory-like ride. The coil spring comes pre-installed, so the strut can be fitted without strut disassembly. The factory strut is removed and this unit takes its place.

The strut has a massive bore and a chrome hardened piston rod, plus a leak-proof piston seal built for durability during off-road use. Each strut is tuned for its application and has a variable dampening system. The strut improves tire contact with the road for stability and carries a 3-year Limited Warranty.

Key features

  • 2 inch front lift from a loaded strut
  • Pre-installed coil spring
  • Gas charged design
  • Massive bore and chrome hardened piston rod
  • Leak-proof piston seal
  • Variable dampening system

Choosing a loaded strut

A loaded strut saves time because the spring, seat and strut body arrive as one assembly. That makes the job faster, but it also means the spring rate and ride height are fixed by the unit rather than picked during the install. Compare the old strut’s length and mounting points with the new assembly before starting, since the top mount and bearing plate often need to be swapped along with the strut.

After installation, the front end should be aligned, and the bolts should be rechecked after the first few drives. Loaded struts can change the camber setting, so tire wear should be watched closely in the first few thousand miles. Inspect the sway bar links and bushings at the same time, because worn parts are easier to replace while the front end is open.

  • Replace the top mount and bearing together
  • Schedule a front alignment after installation
  • Recheck fasteners after the first drives

Specifications

Brand Rough Country
Part number 501126
Shock series N3 Performance
Shock type Lift strut
Compressed length 14.61 inches
Extended length 19.88 inches
Hydraulic or gas charged Gas charged
Position Front
Warranty 3-year Limited Warranty
Fitment type Direct fit
Vehicle Toyota Tacoma, 1995 to 2004

Vehicle fitment

It fits the 1995 to 2004 Toyota Tacoma in the Base, DLX, Limited, Pre Runner, S-Runner and SR5 trims. Confirm fit for your vehicle’s year, model and trim before ordering.

Tacoma generations from 2005 onward are not on the list. Confirm your vehicle’s year, model and trim before ordering.

What’s included

The product is a single front loaded strut with its pre-installed coil spring. It carries a 3-year Limited Warranty.

Fitment

VehicleYearsTrims
Toyota Tacoma1995–2004Base, DLX, Limited, Pre Runner, S-Runner, SR5

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the 501126 fit a 2005 or newer Tacoma?

No. It fits the 1995 to 2004 Toyota Tacoma only, so 2005 and later generations are not covered. Confirm your truck's year and trim before choosing this strut.

What are the compressed and extended lengths?

The compressed length is 14.61 inches and the extended length is 19.88 inches. Measure the factory strut before ordering to confirm it matches those figures.

Does this strut come with the coil spring?

Yes. The strut comes with a pre-installed coil spring, so the factory strut is removed and this loaded unit is fitted in its place without strut disassembly.

Should the upper strut mount be replaced with a loaded strut?

Often yes. The top mount and bearing wear over time, and replacing them with the new assembly avoids noise and uneven spring loading later.

How can I tell when a front strut needs replacing?

Watch for nose-diving when braking, bouncing after bumps, or oil on the strut body. Uneven tire wear also suggests the damping has dropped and the front should be inspected.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon