Overview
The Rough Country 23157_A is a front N3 shock sold as a pair for 4WD Silverado and Sierra 1500 trucks with a 3.5 to 6.5 inch lift. It is a monotube, gas charged shock with a stud top mount and a clevis bottom mount. Its extended length is 21.5 inches and its collapsed length is 13.74 inches.
It fits the 2002 to 2006 Cadillac Escalade in the Base trim, the 2002 to 2006 Chevrolet Avalanche 1500, and the 1999 to 2006 Silverado 1500 in the Base, Hybrid, LS, LT, SS, WT and Z71 trims. It also fits the 2007 Silverado 1500 Classic, the 2000 to 2006 Suburban 1500, the 2001 to 2006 Tahoe, the 1999 to 2006 Sierra 1500 in the named trims, the 2007 Sierra 1500 Classic, and the 2000 to 2006 GMC Yukon and Yukon XL 1500 in the named trims. Confirm the vehicle on your truck before choosing these shocks.
The shock uses 10-stage variable valving and a high pressure nitrogen charge. It has a 35mm piston and an 18mm chromed hardened piston rod with a spring loaded seal. The 54mm body is designed to shed heat, and the shock is rated to a 36kN tensile strength with military spec fluid rated to 40 degrees C.
Rubber bushings are designed to absorb road impact, and the shock is finished in metallic silver. It carries a 3-year warranty.
Key features
- 10-stage variable valving
- High pressure nitrogen charge
- 35mm piston
- 18mm chromed hardened piston rod, spring loaded seal
- 54mm shock body
- Rubber bushings and metallic silver finish
Replacing shocks in pairs
Shocks are normally replaced as a pair so that both fronts respond the same way over bumps and during braking. Mismatched damping can pull the truck to one side and make steering feel uneven. When buying a pair, check that both shocks are the same length and that the mounting hardware is included or already on hand.
A lift changes how the shock works, because the extended length and travel must suit the new ride height. Look at the bump stops, brake lines and sway bar links when the front end is raised, since those parts can contact the shock at full compression. Old bushings and mounts should be inspected at the same time and replaced if they are cracked or worn.
- Replace both fronts together
- Check bump stops after a lift
- Inspect brake lines near the shock body
Specifications
| Brand | Rough Country |
|---|---|
| Part number | 23157_A |
| Shock series | N3 Performance |
| Shock type | Monotube |
| Lift range | 3.5 to 6.5 inches |
| Extended length | 21.5 inches |
| Collapsed length | 13.74 inches |
| Top mount | Stud |
| Bottom mount | Clevis |
| Piston | 35mm |
| Rod | 18mm chromed hardened |
| Body | 54mm |
| Tensile strength | 36kN |
| Fluid rating | Military spec, rated to 40 degrees C |
| Warranty | 3-year warranty |
| Sold | As a pair |
Vehicle fitment
It fits the 2002 to 2006 Cadillac Escalade in the Base trim, the 2002 to 2006 Chevrolet Avalanche 1500, and the 1999 to 2006 Silverado 1500 in the Base, Hybrid, LS, LT, SS, WT and Z71 trims.
The list also covers the 2007 Silverado 1500 Classic, the 2000 to 2006 Suburban 1500, the 2001 to 2006 Tahoe, the 1999 to 2006 Sierra 1500 in the Base, Denali, HT, Hybrid, SL, SLE, SLT and WT trims, the 2007 Sierra 1500 Classic, and the 2000 to 2006 GMC Yukon and Yukon XL 1500 in the named trims.
These shocks are sized for 4WD Silverado and Sierra 1500 trucks with a 3.5 to 6.5 inch lift. Confirm the drive type, lift and vehicle before ordering.
What’s included
Two shocks are supplied, one for each front position. Check the bushings and hardware against your installation before starting.









