Overview
The G2 Dana 44 JK 1350 Series Pinion Yoke, part 90-2052-35U, is a precision forged steel pinion yoke for a 1350 series U-joint. It is designed for U-bolt style mounting, which many racers and off-roaders choose.
The yoke comes without hardware. The 3-94-18X U-bolt kit is the matching hardware and is sold separately.
Key features
- Precision forged steel
- Takes a 1350 series U-joint
- U-bolt style mounting
Pinion yoke and U-joint setup
The pinion yoke connects the driveshaft to the pinion, so its fit on the pinion splines and its U-joint bore both matter. U-bolt style mounting clamps the yoke to the pinion, which makes the nut and bolts a key part of the assembly. Before installing, check that the yoke bore is clean and free of burrs that could hold the U-joint cap out of square.
Driveshaft angles and U-joint size affect vibration, so a yoke in good condition with the correct series U-joint is important. Inspect the yoke for cracks, wear in the U-joint bore and damaged pinion seal surfaces when it is removed. Replace the pinion seal while the yoke is off, and tighten the nut and U-bolts to the values required for your setup.
- Check the yoke bore for burrs
- Inspect the seal surface for grooves
- Pair the U-bolts with the matching kit
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 90-2052-35U |
| UPC | 631410123005 |
| Material | Precision forged steel |
| U-joint series | 1350 |
| Mounting | U-bolt style |
| Axle location | Front |
Vehicle fitment
It is a front axle yoke, so confirm the Dana 44 JK pinion size and the U-joint series before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the hardware is sold separately, buy the 3-94-18X U-bolt kit with the yoke. Check the 1350 series U-joint size before assembly.
What’s included
The pinion yoke only.
Not included: U-bolt mounting hardware, sold separately. The 3-94-18X U-bolt kit is the matching hardware.








