Curt Manufacturing
Showing 49–96 of 285 resultsSorted by popularity
-
-
-
-
-
Trailer Wire Mounting Bracket
Curt Manufacturing Vehicle To Trailer Connector with Harness – 56281
- Fits 2014–2015 and 2017–2018 INFINITI QX60 (Base, Hybrid)
- Fits 2013–2018 Nissan Pathfinder in several trims
- 4-way flat output; signal circuits rated 7.5 amps per side
- Tail and running circuits rated 7.5 amps total; install time 30 min.
SKU: CRT56281 -
Trailer Connector Kit
Curt Manufacturing Vehicle To Trailer Connector with Harness – 56096
- Fits 2010–2016 Cadillac SRX Base, Luxury, Performance and Premium
- Plugs into existing vehicle socket for a 4-way flat trailer socket
- Dust cover included; plug-and-play, no splicing
- Install time 5 min.; made in USA; part number CRT56096
SKU: CRT56096 -
-
-
-
Trailer Hitch Cargo Carrier
Curt Manufacturing Tray-Style Hitch-Mounted Bike Rack – 18085
- Curt tray-style hitch-mounted bike rack, part number CRT18085
- Three-point hold with two bottom cradles and a ratcheting arm
- Integrated lock on the ratcheting arm
- Not for use on a trailer or other towed vehicle
SKU: CRT18085 -
-
-
Trailer Wire Mounting Bracket
Curt Manufacturing Trailer Wire Connector Bracket – 57208
- Curt Manufacturing trailer wire connector bracket, part number CRT57208
- Brand: Curt Manufacturing, catalogued under brake controllers and electrical
- Universal fit; no specific vehicle year, make or model applies
SKU: CRT57208 -
-
-
-
-
Trailer Hitch Ball
Curt Manufacturing Trailer Hitch Ball (Stainless Steel) – 40080
- Curt Manufacturing CRT40080: 1-7/8 inch stainless steel trailer hitch ball
- 2,000 LBS weight rating
- 3/4 inch shank hole size
- Pull-pin design lets you swap to another ball size
- Universal fit, so the shank hole decides the match
SKU: CRT40080 -
-
-
-
-
-
-
-
Trailer Brake Control Wire Harness
Curt Manufacturing Trailer Brake Controller Harness – 51456
- Universal fit quick plug trailer brake controller harness
- Part number CRT51456 from Curt Manufacturing
- Two plugs: original equipment socket and CURT brake controller
- Two feet of wire with slit loom sleeve
SKU: CRT51456 -
Trailer Wire Harness
Curt Manufacturing Towed-Vehicle RV Harness Add-On – 58920
- Curt Manufacturing 58920 towed-vehicle RV harness add-on, part CRT58920
- Adds a 4-Way flat connection to any Curt RV harness
- Works with a 3-Wire system and battery connection
- Universal Fit, not tied to particular vehicles
SKU: CRT58920 -
-
Trailer Wire Harness
Curt Manufacturing Towed-Vehicle RV Harness – 58909
- Towed-vehicle RV harness with standard 4-way flat trailer plug
- Fits 2014–2017 Jeep Cherokee (KL), 2016 Jeep Cherokee (XL) and 2018 Jeep Cherokee
- Integrated block diodes isolate vehicle electronics from RV signals
- Uses the vehicle’s existing taillights, brake lights and turn signals
SKU: CRT58909 -
-
Trailer Hitch Ball
Curt Manufacturing Switch Ball With 1in. Shank Chrome 6000lbs (Chrome) – 42178
- Curt Manufacturing CRT42178 chrome switch ball, 1-7/8 x 2 inch size
- Balls change without removing the center post
- 1-inch shank hole with a 3,500 LBS weight rating in the specs
- 6000lbs and 3,500 LBS ratings both appear; confirm the rating before towing
SKU: CRT42178 -
-
-
Cargo Straps and Anchors
Curt Manufacturing Surface Mounted Tie-Down D Ring – 83732
- Curt Manufacturing surface mounted D-ring tie-down anchor, part number CRT83732
- Universal fit, a mounting anchor rather than a vehicle-specific part
- Steel construction with stainless finish
- Capacity of 1,200 lbs
- Mounting bracket 2 1/4 inch x 13/16 inch with two 1/4 inch holes
- Mounting screws not included
SKU: CRT83732 -
Trailer Break Away Safety Systems
Curt Manufacturing Soft-Trac I Breakaway Kit with Charger – 52040
- Universal fit for trailers with electric trailer brakes
- Soft-Trac I breakaway kit with charger, part number CRT52040
- 12-volt, 5-amp rechargeable battery with 12-volt charger
- Nylon breakaway switch with 48-inch lanyard
- Lockable top-load battery case
SKU: CRT52040 -
Seat Covers
Curt Manufacturing Seat Defender 58″ x 55″ Removable Waterproof Rear Bench Seat Cover (Black) – 18511
Seat CoversCurt Manufacturing Seat Defender 58″ x 55″ Removable Waterproof Rear Bench Seat Cover (Black) – 18511
- Universal fit rear bench seat cover; no specific vehicle years or models are named
- Size 58 in x 55 in, black
- Two-sided waterproof construction of thermoplastic rubber and 600-denier terylene fabric
- Removable and easy to install, clean and store; part number CRT18511
SKU: CRT18511 -
-
Trailer Connector Kit
Curt Manufacturing Replacement OEM Tow Package Wiring Harness – 56042
- Replacement OEM tow package wiring harness for 2008–2019 Toyota Highlander
- Plugs into the existing vehicle socket to provide a 4-way flat socket
- Plug-and-play design, no splicing; standard 2-wire system
- Dust cover included; install time 20 min.
- Made in USA; part number CRT56042
SKU: CRT56042 -
-
-
Trailer Hitch Ball Bushing
Curt Manufacturing Reducer Sleeve – 45409
- Curt Manufacturing 45409 reducer sleeve, part number CRT45409
- Reduces a 3 x 3 inch receiver tube opening to 2-1/2 x 2-1/2 inch
- Universal fit: match the receiver tube size, not a vehicle model
- Black carbide powder coat finish for rust, chip and UV resistance
- Trailer weight ratings are those of the hitch
SKU: CRT45409 -














































