Overview
The Curt Manufacturing 17500 is a trunnion spring bar for weight distribution hitches, listed under part number CRT17500. Spring bars are a core part of a weight distribution hitch setup and work with a trunnion bar to help level the trailer.
Check dimensions, weight ratings and finish against your hitch before installing the spring bar.
Setting up spring bar tension
A trunnion spring bar works with the trunnion bar to apply lift through the hitch. The tension on the spring bars brings the front of the trailer up and restores weight to the front axle of the tow vehicle, so level riding depends on how the bars are set.
Tension should be set with the trailer hitched on level ground, then checked after the first short drive. Confirm both sides carry similar load and that the tow vehicle and trailer sit level. Adjusting one side without checking the other often leaves the rig crooked.
Over time, spring bars can lose their set or develop bends and worn ends at the brackets. Inspect for sagging, cracks at the bends and worn bushings. A bar that will not hold its setting should be replaced rather than re-tensioned, and its mounting hardware should be checked at the same time.
- Set tension with the trailer hitched on level ground
- Recheck both sides after a short drive
- Replace bars that will not hold their setting
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT17500 |
| Product type | Trunnion spring bar for weight distribution hitch |
Vehicle fitment
It is universal fit, so compatibility depends on your hitch and trailer rather than a named vehicle. Confirm your vehicle’s year, model and trim before ordering.
Check that the spring bar suits your hitch and trailer before use. Confirm your vehicle’s year, model and trim before ordering.













