Overview
The Curt Manufacturing CRT40062 is a 1-7/8-inch chrome hitch ball with a 3,500 LBS weight rating, fitted on a 1-inch shank hole. It is a Fastways interchangeable ball, so the size can be changed by pulling a pin.
The stainless steel body keeps its finish against rust and corrosion, so the ball suits long years of regular towing.
Key features
- 1-7/8 inch ball size
- 3,500 LBS weight rating
- 1-inch shank hole
- Pin-secured interchangeable design
- Stainless steel with a chrome finish
Before you buy
A hitch ball carries the full tongue load of the trailer, so it has to match the coupler and the receiver it sits in. Before fitting a ball, check the ball diameter marked on the coupler and compare it with the ball you plan to use. A mismatch can let the coupler rattle or pop off under load.
Interchangeable balls add a second point to inspect. The pin and the ball’s threaded base both carry load, so look at the pin for bending and make sure the ball seats fully against the shank before each trip. A light coat of grease on the threads helps prevent seizing when you change sizes.
- Check the pin for bending or wear
- Make sure the ball seats fully before towing
- Replace a ball showing cracks or flat spots
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT40062 |
| Ball size | 1-7/8 inch |
| Weight rating | 3,500 LBS |
| Shank hole size | 1 inch |
| Finish | Chrome |
| Material | Stainless steel |
Vehicle fitment
It is Universal Fit, so it is not built for one make, model or trim. The shank hole on your mount and the trailer you tow decide whether the size is right.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Remove the pin, lift the ball off, and fit the new size before reinserting the pin.









