Select your vehicle

Curt Manufacturing Towed-Vehicle RV Harness – 58909

Curt Manufacturing

$98.78In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 18, 2026 12:00 PM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Towed-vehicle RV harness with standard 4-way flat trailer plug
  • Fits 2014–2017 Jeep Cherokee (KL), 2016 Jeep Cherokee (XL) and 2018 Jeep Cherokee
  • Integrated block diodes isolate vehicle electronics from RV signals
  • Uses the vehicle’s existing taillights, brake lights and turn signals

Description

Overview

The Curt Manufacturing 58909 is a towed-vehicle RV harness for dinghy towing a Jeep Cherokee behind a motorhome. It links the towed vehicle’s taillights, brake lights and turn signals to the RV through a standard 4-way flat trailer plug.

Integrated block diodes isolate the vehicle’s electronics from RV signals, and the plug-and-play design avoids cutting or splicing. It fits select 2014–2018 Jeep Cherokee models, as shown in the fitment section below.

Key features

  • Standard 4-way flat trailer plug connects the towed vehicle to the RV
  • Uses the vehicle’s existing taillights, brake lights and turn signals
  • Integrated block diodes isolate sensitive vehicle electronics from RV signals
  • Plug-and-play design with no cutting or splicing

Dinghy towing basics

Dinghy towing puts the towed vehicle’s own lights in the RV’s control, so the harness carries every signal the driver of the motorhome depends on. Taillights, brake lights and turn signals all pass through the same plug, which makes the connection the single point where a fault can hide. Lights that work at the vehicle but not at the RV usually point to the plug, the socket or a ground rather than the wiring behind the bumper.

Block diodes help keep the towed vehicle’s electronics separate from RV signals, but they do not replace good habits. Keep the connector dry, seat it fully before each departure and check the lights every time the setup is changed. Dinghy towing also involves more than lights, so think about safety cables, a supplemental braking system if one is used and the total weight of the towed vehicle.

  • Test all lights with the RV running before leaving
  • Check that the plug is fully seated and locked
  • Keep the connector covered when unplugged
  • Inspect the connector for corrosion after wet trips

Specifications

Brand Curt Manufacturing
Part number CRT58909
Harness type Towed-vehicle RV harness
Connector Standard 4-way flat trailer plug
Protection Integrated block diodes

Vehicle fitment

It fits the 2018 Jeep Cherokee (Latitude, Limited, Overland, Trailhawk), the 2014–2017 Jeep Cherokee (KL) (75th Anniversary, Latitude, Limited, Overland, Sport, Trailhawk) and the 2016 Jeep Cherokee (XL) (Overland). Confirm fit for your vehicle’s year, model and trim before ordering.

Other Cherokee model years are not on the list. Confirm your vehicle’s year, model and trim before ordering.

What’s included

Included is the towed-vehicle RV harness with its standard 4-way flat connection. Check the package contents against your installation before starting.

Fitment

VehicleYearsTrims
Jeep Cherokee2018Latitude, Limited, Overland, Trailhawk
Jeep Cherokee (KL)2014–201775th Anniversary, Latitude, Limited, Overland, Sport, Trailhawk
Jeep Cherokee (XL)2016Overland

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the Curt 58909 fit a 2018 Jeep Cherokee?

Yes. The 2018 Jeep Cherokee is listed with Latitude, Limited, Overland and Trailhawk trims. Confirm your vehicle's year, model and trim before ordering.

Does the 58909 fit other Cherokee model years?

Other Cherokee years fall outside this fit. Confirm fit for your vehicle's year, model and trim before installing on any Cherokee year.

Does this RV harness use the vehicle's own lights?

Yes. It uses the towed vehicle's existing taillights, brake lights and turn signals, and integrated block diodes isolate the vehicle's electronics from the RV signals.

How should the harness connection be checked before a tow?

Test the taillights, brake lights and turn signals with the RV running before leaving. Confirm the plug is seated fully and the connector is dry. A signal that fails often points to the plug or a ground rather than the harness itself.

Does the harness provide braking for a dinghy-towed vehicle?

No. The harness carries lighting signals only. Braking for a towed vehicle is a separate system, so a supplemental braking setup and safety cables should be planned on their own.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon