Overview
The Curt Manufacturing CRT40082 is a 2 inch stainless steel trailer hitch ball with a 3,500 LBS weight rating and a 3/4 inch shank hole. It is one of Curt’s Fastways interchangeable balls, which are changed by pulling a pin.
It is made from stainless steel, which Curt describes as resistant to rust and corrosion. Because the ball is marked Universal Fit, the shank hole size and weight rating are the most useful points to compare with your setup.
Key features
- 2 inch ball diameter
- 3,500 LBS weight rating
- 3/4 inch shank hole
- Stainless steel construction with a claimed resistance to rust and corrosion
- Pin-release swap design of the Fastways line
Towing with a 2 inch ball
A 2 inch ball is a common size for smaller trailers, but the coupler must be the same size. The coupler is usually stamped with its ball size, so check that marking and the trailer’s weight before connecting. Match the ball to the coupler first, then confirm the mount and receiver can carry the load. A ball that rattles or wears unevenly can allow the coupler to shift, which affects steering and braking control.
Stainless steel ball surfaces are easy to care for. After salt or mud exposure, rinse the ball and dry it, then check for pitting around the neck. Replace a ball that shows cracks or rounded flats. Keep a spare pin on hand, since a missing pin is a common reason a swap goes wrong.
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT40082 |
| Ball size | 2 inch |
| Weight rating | 3,500 LBS |
| Shank hole size | 3/4 inch |
| Finish | Stainless Steel |
| Fitment | Universal Fit |
Vehicle fitment
No specific vehicle is named for this ball. It is marked Universal Fit, so it is not limited to a make, model or year, and the trailer’s weight and the hitch’s shank size should be confirmed before use.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Changing from another ball means pulling the pin, lifting off the old size, seating the 2 inch ball and securing the pin. Test the fit on the shank before you tow.
What’s included
The stainless steel ball, part number CRT40082. No other parts come with it.
Not included: a hitch receiver and ball mount, which the ball needs for installation.









