Overview
The Curt Manufacturing CRT40081 is a stainless steel trailer hitch ball with a 1-7/8 inch size and a 3,500 LBS weight rating. It has a 1 inch shank hole and comes from the Fastways interchangeable range.
The stainless steel finish is built to resist rust and corrosion. It is a Universal Fit ball, so match its shank and weight rating to your hitch and trailer.
Key features
- Stainless steel finish that Curt says resists rust and corrosion
- Pin-release design lets you swap the ball size
- 1-7/8 inch ball
- 3,500 LBS weight rating
- 1 inch shank hole size
Care and pin inspection
Stainless steel holds up well to weather, but road salt, mud and standing water can still leave residue on the ball and shank. Wipe the ball after wet or salty trips and keep the shank free of grit before reinserting it into the mount. Pitting or dull patches near the shank are signs to inspect the ball more closely.
The pin-release method means the pin takes the most wear, since it is pulled and reinserted every time the ball is changed. Look for bends, flattened sections and a pin that rattles or sits loose. Replace worn pins and keep the mount tight so the ball does not shift under load. Recheck the pin’s seating after each size change.
- Rinse the ball after salt exposure
- Check the pin before every tow
- Retighten the mount bolts after the first few trips
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT40081 |
| Ball size | 1-7/8 inch |
| Weight rating | 3,500 LBS |
| Shank hole size | 1 inch |
| Finish | Stainless Steel |
| Fitment | Universal Fit |
Vehicle fitment
No specific vehicle is named. Universal Fit places this ball outside any single make, model or year, so match its 1 inch shank hole and 3,500 LBS rating to your hitch and trailer.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Swapping sizes uses the same pin-release method: pull the pin, remove the ball, fit the new size and reinsert the pin. Make sure the 1 inch shank hole fits your mount before towing.
What’s included
The stainless steel trailer hitch ball, part number CRT40081. No other parts come with it.
Not included: any hitch receiver or ball mount, since the ball has to fit a mount with a 1 inch shank hole.









