Overview
The Curt Manufacturing Towed-Vehicle RV Harness Add-On, part number CRT58919, adds a 4-way flat connection to any Curt RV harness. It is made for a 3-wire system and attaches to an existing harness rather than a particular vehicle.
Wiring a towed vehicle harness
An RV harness link carries signals for lights and accessories between the tow vehicle and the towed vehicle, so the connector type and wire count matter. Before adding an accessory connection, trace each wire and label the circuits. Keep the plug housings clean and dry to prevent corrosion, and avoid mixing connector types that were not designed to work together.
When adding a connection to an existing harness, route the cable away from exhaust heat and moving suspension parts, and secure it with clips. Inspect the connector pins for bent or pushed-back terminals, and check that the seal around the plug is intact. Test each circuit with the lights switched on before departing, so any fault is found in the driveway rather than on the road.
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT58919 |
| Connection | 4-way flat |
| Wiring system | 3-wire |
Vehicle fitment
It is universal fit and is not built for a single vehicle. It attaches to a Curt RV harness.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because it works with a 3-wire system, confirm that your existing harness is 3-wire before connecting it.
What’s included
Confirm the included parts against your installation before starting.









