Overview
The Curt Manufacturing CRT40083 is a 2 inch stainless steel trailer hitch ball with a 6,000 LBS weight rating. It has a 1 inch shank hole and belongs to Curt’s Fastways interchangeable range.
The stainless steel finish is corrosion resistant, so it holds up in wet and salted conditions. The ball is Universal Fit, so the 1 inch shank hole and 6,000 LBS rating are the key details to compare.
Key features
- 6,000 LBS weight rating
- 2 inch ball size
- 1 inch shank hole
- Stainless steel finish
- Pin-release interchangeable design
Heavy towing considerations
A high-rated ball is put under heavy, repeated loads, so the connection points deserve steady attention. The pin, the threaded base and the shank contact all carry force when towing. Check each one before departure, and look for any movement or wear that suggests the ball is shifting.
Heavy trailers also put more stress on the coupler and the receiver. Make sure the trailer’s loaded weight is well within what the ball and hitch can handle, and that the coupler is rated for the ball diameter in use. Reducing the load is often the safest way to avoid overloading the setup.
- Check the pin and shank before departure
- Keep trailer weight within the ball and hitch ratings
- Watch for movement or wear at the shank
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT40083 |
| Ball size | 2 inch |
| Weight rating | 6,000 LBS |
| Shank hole size | 1 inch |
| Finish | Stainless Steel |
| Fitment | Universal Fit |
Vehicle fitment
No specific vehicle is listed. Universal Fit keeps the ball free of any single make, model or year, so verify that the 6,000 LBS rating and 1 inch shank hole match the trailer and hitch you plan to use.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Remove the current ball by pulling its pin, then set this 2 inch ball on the shank and reinsert the pin. Check the 1 inch shank hole against your mount before you tow a heavy load.
What’s included
The 2 inch stainless steel ball, part number CRT40083. No other hardware is described.
Not included: any hitch receiver or ball mount, since the ball needs a shank with a 1 inch hole to attach.









