Overview
The CURT Trailer Brake Controller Harness, part number CRT51456, is a quick plug harness that connects a CURT trailer brake controller to the tow vehicle’s power system. It is universal fit, so it is not tied to a particular vehicle. Trailer brakes need dependable control when hauling heavy loads such as livestock, construction materials or industrial equipment, and this harness is part of that setup.
The harness uses an original equipment connector, so the brake controller plugs directly into the vehicle’s power system. One plug snaps into the vehicle’s original equipment socket and the other connects to the CURT brake controller. Plug-and-play installation gets the controller set up quickly, and the included two feet of wire and slit loom sleeve keep the wiring protected and contained.
Key features
- Quick plug design with two plugs
- One plug fits the vehicle’s original equipment socket
- The other plug connects to a CURT brake controller
- Plug-and-play installation
- Two feet of wire
- Slit loom sleeve keeps wires well protected and contained
Matching the controller and harness
A brake controller harness is only as good as the controller it feeds and the socket it plugs into. Controllers differ in how they apply trailer brake output, so the harness should be routed and mounted with the controller’s location in mind. A controller that sits where it can vibrate loose or take in heat from the engine bay will not perform as consistently over time.
Plugs and sockets wear as well. Check the socket pins for corrosion, bent contacts or looseness, since a poor connection can cause intermittent brake control. Route the wire away from moving suspension parts and sharp edges, and leave enough slack that the plugs are not pulled when the vehicle moves over bumps. Secure the run with the slit loom sleeve and fasteners so it stays tidy.
- Controller mounting height and angle
- Heat exposure near the exhaust
- Plug fit and locking tabs
- Routing away from moving parts
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT51456 |
| Product type | Trailer brake controller harness, quick plug |
| Connectors | Two plugs: vehicle original equipment connector and CURT brake controller connector |
| Wire length | Two feet |
| Wire protection | Slit loom sleeve |
Vehicle fitment
It is universal fit and not tied to a particular tow vehicle. The vehicle-side plug is an original equipment connector, so the socket on your vehicle should match it. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Connect the vehicle-side plug to the vehicle’s original equipment socket first, then connect the other plug to the CURT brake controller. The two feet of wire and slit loom sleeve keep the run tidy and protected. Check that the brake controller is mounted securely before towing.
What’s included
The harness includes two plugs, two feet of wire and a slit loom sleeve.
Not included: the CURT brake controller, which the harness connects to and which must be obtained separately.









