Jeep Wrangler (JK) Fabrication & Tools
38 fabrication & tools listed for the 2007–2018 Jeep Wrangler (JK)
Every part on this page is listed by its maker for this model; the most represented brands are Artec Industries, G2 Axle and Gear and TeraFlex. Open a part for its specs, part number and the exact model years and trims it covers, or select your year below to check fitment on every page.
Showing 1–24 of 38 resultsSorted by popularity
-
Axle Truss, Brackets, Gussets & Tabs, Fabrication & Tools
Rock Krawler JK/JL/JT Dynatrac XD 60 Rear Axle Truss – RK07702
Axle Truss, Brackets, Gussets & Tabs, Fabrication & ToolsRock Krawler JK/JL/JT Dynatrac XD 60 Rear Axle Truss – RK07702
- Rock Krawler RK07702 rear axle truss, with Dana 60 axle type and Dynatrac XD 60 named in the title
- Rear axle location; no steering ram mount
- Fits 2007 to 2018 Jeep Wrangler JK, 2018 to 2026 JL and 2020 to 2026 Gladiator JT
- Made in the U.S.A.
SKU: RKSRK07702 -
Control Arm Bushing Tool, Fabrication & Tools, Specialty Tools
Rancho Bushing Installation Tool – RS62108
Control Arm Bushing Tool, Fabrication & Tools, Specialty ToolsRancho Bushing Installation Tool – RS62108
- Rancho RS62108 control arm bushing installation tool, 3 piece set
- Used to install the RS881015 control arm bushing
- Fits 1998–2006 Jeep Wrangler TJ, 2004–2006 LJ and 2007–2018 JK
- Front position
SKU: RANRS62108 -
Axle Truss, Brackets, Gussets & Tabs, Fabrication & Tools
G2 Truss Upper Link Mount – 68-2052-2
- Rear Dana 44 upper link mount for the G2 rear axle truss
- Manufacturer fitment lists 2007-2018 Jeep Wrangler JK
- Heavy-duty steel, unpainted; welding required
- Part number 68-2052-2; pairs with truss 68-2052-1
SKU: G/268-2052-2 -
Axle Truss, Brackets, Gussets & Tabs, Fabrication & Tools
Artec Industries JK 1 Ton – Superduty (99-04) Front Dana 60 Swap Kit with Currie Johnny Joints – JK6042
Axle Truss, Brackets, Gussets & Tabs, Fabrication & ToolsArtec Industries JK 1 Ton – Superduty (99-04) Front Dana 60 Swap Kit with Currie Johnny Joints – JK6042
- Front Dana 60 axle swap kit with 1/4 inch truss and built-in link brackets, part number A/IJK6042
- Artec lists fitment for 2007 to 2018 Jeep Wrangler JK models
- Dana 60 axles need new wheels because the bolt pattern differs from factory JK 5 lug
- Brake and steering components are not included
- Check axle tube lengths of 3.0 inch and 24.5 inch before welding
SKU: A/IJK6042 -
Axle Bracket
TeraFlex Axle Bracket Kit – 3990700
- TeraFlex axle bracket kit, part number 3990700, front
- Designed for new JK CRD60 axle applications, tied to 2007-2018 Jeep Wrangler JK
- Laser cut from 3/16 inch steel, ready for welding and paint or powder coating
- Includes shock, sway bar, flex arm, spring pad and track bar mounts
SKU: TER3990700 -
-
-
Gussets & Tabs
Artec JK Front Axle Armor Kit – JK4411
- Built for the front Dana 44 axle on 2007-2018 Jeep Wrangler JK (JK chassis code)
- Artec Industries part number A/IJK4411, UPC 816791021762
- 1/4-inch thick truss top and 10 gauge gussets
- Includes front axle truss, front lower control arm skids, inner C gussets and a stock height track bar bracket
- Requires welding and general fabrication
SKU: A/IJK4411 -
Gussets & Tabs
Artec JK Front Axle Armor Kit – JK4410
- Front axle armor kit for the Dana 44 axle on 2007-2018 Jeep Wrangler JK (JK chassis code)
- Part number JK4410 from Artec Industries, raised height tracbar bracket included
- Truss top of 1/4″ thick material with 10Ga. gusseting
- Includes front lower control arm skids and inner C gussets
- Welding and general fabrication required
SKU: A/IJK4410 -
Axle Truss
Artec Dana 44 Front Axle Truss – JK4401
- Artec Industries JK4401 front axle truss for the Dana 44 on 2 and 4-door Jeep Wrangler JK models
- Fits 2007–2018 Jeep Wrangler JK with a front Dana 44 axle
- 1/4 inch mild steel truss top with 10Ga. gusseting for both axle tubes
- Designed for vehicles with at least minor lifts; check clearances if unlifted
- Installation requires welding to the cast center section
SKU: A/IJK4401 -
Gussets & Tabs
Artec JK Front Axle Armor Kit – JK3011
- Artec JK3011 factory-height front axle armor kit for the front Dana 30 JK axle
- Fits the 2007-2018 Jeep Wrangler JK with the front Dana 30 JK axle
- 1/4-inch thick truss top and 10Ga. gussets that strengthen both axle tubes
- Kit includes front axle truss, lower control arm skids, inner C gussets and factory-height tracbar bracket
- For lifts that mount the tracbar to the factory axle bracket
- Requires welding and general fabrication
SKU: A/IJK3011 -
Gussets & Tabs
Artec JK Front Axle Armor Kit – JK3010
- Artec JK3010 raised-height front axle armor kit for the front Dana 30 JK axle
- Fits the 2007-2018 Jeep Wrangler JK, based on the JK chassis code
- 1/4-inch thick truss top and 10Ga. gussets that strengthen both axle tubes
- Kit includes front axle truss, lower control arm skids, inner C gussets and raised tracbar bracket
- For a drag link flip, which needs a minimum 3-inch lift and bumpstop extensions
- Requires welding and general fabrication
SKU: A/IJK3010 -
Axle Truss
G2 Dana 44 Front Axle Truss – 68-2051
- Front Dana 44 axle truss and armor system for the Jeep Wrangler JK
- Heavy-duty steel: 1/4 inch main components, 1/8 inch reinforcement plates
- Includes the axle truss, lower control arm skids, inner C gussets and track bar bracket
- Welding required, including to the cast center section
SKU: G/268-2051 -
Axle Truss
G2 Dana 44 Front Axle Top Truss – 68-2051-1
- Front Dana 44 top truss for the Jeep Wrangler JK, 2007-2018
- Heavy-duty steel with 1/4-inch main components and 1/8-inch reinforcement plates
- Welding required, including to the cast center section
- Two-door and four-door JK models for US-spec vehicles
- Part number 68-2051-1, UPC 631410121209
SKU: G/268-2051-1 -
Axle Truss
G2 Dana 30 Front Axle Top Truss – 68-2050-1
- Top truss for the Dana 30 front axle on 2007-2018 Jeep Wrangler JK
- Heavy-duty steel: 1/4 inch main components, 1/8 inch reinforcement plates
- Unpainted; welding required, including to the cast center section
- Fits 2-door and 4-door models; includes top truss only
SKU: G/268-2050-1 -
Axle Truss
G2 Rear Dana 44 Truss – 68-2052-1
- G2 rear Dana 44 axle truss, part 68-2052-1, for the Jeep JK
- Heavy-duty steel, 1/4 inch components and 1/8 inch plates
- Intended for JKs with at least some lift; check clearance on lower-lift vehicles
- Welding required; upper link mount sold separately
SKU: G/268-2052-1 -
-
-
Gussets & Tabs
Artec Heavy Duty Raised Tracbar Bracket – JK4406
- Raised front tracbar bracket for Dana 30 or Dana 44 JK axles
- Raised tracbar holes at 1.75 inch and 3.0 inch
- Built for a drag link flip kit
- Lifts the factory sway bar mount 1.75 inch
- Made from 1/4 inch mild steel, bare steel finish
- Adjusts roll center 3 inches higher for stability
SKU: A/IJK4406 -
-
Gussets & Tabs
Artec Heavy Duty Stock Tracbar Bracket – JK4407
- Stock front tracbar bracket for Dana 30 or Dana 44 JK axles
- 1/4 inch mild steel with a bare steel finish
- Maintains the factory sway bar mount location
- For 2 and 4-door models as a stock tracbar upgrade
- Welding and general fabrication required
SKU: A/IJK4407 -
Axle Truss
G2 Rear Dana 44 Axle Truss System – 68-2052
- G2 rear Dana 44 axle truss and armor system, part 68-2052
- Heavy-duty steel, 1/4 inch main components and 1/8 inch reinforcement plates
- Covers the whole axle, not just the long tube
- Includes coil buckets and the main axle truss assembly
- Welding required; unpainted
SKU: G/268-2052 -
Axle Truss
Artec Dana 30 Front Axle Truss – JK3001
- Artec JK3001 front axle truss for the Dana 30 front axle on Jeep Wrangler JK models
- 1/4 inch truss top and 10 gauge gussets that reinforce both axle tubes
- Requires welding to the cast center section
- Intended for vehicles with at least minor lifts
SKU: A/IJK3001 -
