Overview
The TeraFlex axle bracket kit, part number 3990700, is a set of front axle brackets for new JK CRD60 axle applications, tied to the 2007 to 2018 Jeep Wrangler JK. It provides mounting points for shocks, sway bars, upper and lower flex arms, spring pads and track bars.
The brackets are precision laser cut from 3/16 inch steel and formed to position each mount for correct suspension geometry. The kit is supplied ready for welding and paint or powder coating.
Key features
- Precision laser cut from 3/16 inch steel
- Formed for correct suspension geometry
- Includes shock, sway bar, upper and lower flex arm, spring pad and track bar mounts
- Ready for welding and paint or powder coating
Before you weld
Front axle brackets carry a lot of load in daily driving and on the trail, so the mounting points need to sit square before the first weld. Shock and track bar mounts see the most movement, and a small misalignment there shows up quickly as uneven tire wear or a loose steering feel. Dry fitting each bracket with the component it will hold makes the welding step far more predictable.
After welding and coating, inspect the welds for cracks, especially around the flex arm and spring pad mounts, and recheck every fastener after the first few trail runs. Keep coating out of bolt seats and bushing bores, since bare steel there can corrode and affect fit. Many builders replace the track bar and flex arm bushings at the same time while the axle is apart, so inspect them then.
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 3990700 |
| UPC | 843885002697 |
| Material | Steel |
| Thickness | 3/16 inch |
| Position | Front |
| Application | New JK CRD60 axle |
Vehicle fitment
It is a direct fit for new JK CRD60 axle applications, which places it in the 2007 to 2018 Jeep Wrangler JK.
It does not cover Wrangler TJ, LJ or JL models, which are separate generations.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mounting these brackets is a fabrication job, since they are set in place and welded. Paint or powder coating can be applied after welding.
What’s included
The kit includes shock mounts, sway bar mounts, upper and lower flex arm mounts, spring pads and track bar mounts.
Not included: welding supplies and paint or powder coating services.








