Jeep Wrangler (JK) Bumpers and Grille Guards
183 bumpers and grille guards listed for the 2007–2018 Jeep Wrangler (JK)
Every part on this page is listed by its maker for this model; the most represented brands are Poison Spyder Customs, Rugged Ridge and Smittybilt. Open a part for its specs, part number and the exact model years and trims it covers, or select your year below to check fitment on every page.
Showing 1–24 of 183 resultsSorted by popularity
-
Front Bumpers
Westin Trailblazer Series Winch Mount Front Bumper (Black) – 42-2015
- Fits 2007-2018 Jeep Wrangler (JK), 2-door and 4-door
- 2 inch diameter steel tube, textured black powder coat
- Shackle mount tabs and light brackets included
- Add the TrailBlazer Winch Tray to mount a winch
SKU: WES42-2015 -
-
-
Rear Bumpers
Smittybilt XRC Gen2 Rear Bumper (Black) – 76858
- Rear bumper for the 2007–2018 Jeep Wrangler JK, 2-door and 4-door
- 3/16-inch cold rolled steel with textured matte black powder coat
- Class III receiver hitch, D-ring mounts and LED lights included
- Tire carrier can be added later (not included)
SKU: S/B76858 -
Front Bumpers
Smittybilt XRC M.O.D. Modular Center Section with Winch Plate and D-ring Mounts (Black) – 76825
Front BumpersSmittybilt XRC M.O.D. Modular Center Section with Winch Plate and D-ring Mounts (Black) – 76825
- Center section of the JK XRC M.O.D. bumper system
- Winch plate for a winch up to 15,000 lb
- 3/16 inch steel, textured matte black, welded D-ring mounts
- Add mid or full width end plates and a bull bar or stinger
SKU: S/B76825 -
Rear Bumpers
Smittybilt SRC Gen2 Rear Bumper (Black) – 76614
- Fits 2007–2018 Jeep Wrangler (JK) two-door and four-door models
- Class III receiver hitch built into the bumper
- Solid plate center sections protect frame horns and crossmembers
- Two D-ring mounts, plus a 3/4-inch shackle recommendation
- Backup light cut-out with lights included
SKU: S/B76614 -
Front Bumpers
Smittybilt JK SRC Front Stinger with D-ring Mounts in Textured Matte Black (Black) – 76524
Front BumpersSmittybilt JK SRC Front Stinger with D-ring Mounts in Textured Matte Black (Black) – 76524
- Fits 2007-2018 Jeep Wrangler JK, 2-door and 4-door
- 2 inch DOM tubing with 3/16 inch steel base
- Welded D-ring mounts, light mounts and winch mount included
- Textured black finish with 5-year limited warranty
SKU: S/B76524 -
Front Bumpers
Rugged Ridge Spartan Bumper Overrider – 11548.04
- Spartan bumper overrider for the 2007-2018 Jeep Wrangler JK, 2 and 4 door
- 2 inch OD steel tubing, textured black powder coat
- Angled away from the grille for greater winch clearance
- Two integrated light mounting tabs; hardware and instructions included
SKU: RUG11548.04 -
Front Bumpers
Rugged Ridge Spartan Front Bumper with Standard Ends – 11548.03
- Spartan front bumper with standard ends, no overrider tube, for the 2007-2018 Jeep Wrangler JK
- High-strength plate steel, textured black powder coat
- Stand-alone winch plate with D-shackle mounting plates
- Direct bolt-on with all hardware, 5-year limited warranty
SKU: RUG11548.03 -
Front Bumpers
Rugged Ridge Spartan Front Bumper with Standard Ends and Tube Override – 11548.02
- Spartan front bumper with standard ends and tube overrider for the 2007-2018 Jeep Wrangler JK
- High-strength plate steel, textured black powder coat
- Stand-alone winch plate and D-shackle mounts; D-rings not included
- Direct bolt-on with all hardware, 5-year limited warranty
SKU: RUG11548.02 -
-
-
Front Bumpers
Rugged Ridge Spartacus Front Bumper Kit with Overrider Bar and Winch Plate (Black) – 11544.62
Front BumpersRugged Ridge Spartacus Front Bumper Kit with Overrider Bar and Winch Plate (Black) – 11544.62
- Spartacus bumper kit with front overrider bar, winch plate, rear bumper and D-rings
- Fits the 2007-2018 Jeep Wrangler JK
- High strength 11-gauge steel
- Wide or narrow configurations on both bumpers
SKU: RUG11544.62 -
-
-
Front Bumpers
Rugged Ridge Spartacus Front Bumper (Black) – 11544.01
- Spartacus stamped steel front bumper for the 2007-2018 Jeep Wrangler JK
- 11-gauge stamped steel in satin black powder coat
- Converts to a wide or narrow configuration
- Uses the factory tow hooks; winch plate sold separately
SKU: RUG11544.01 -
Front Bumpers
Rugged Ridge All Terrain Over-Rider Hoop – 11542.14
- All Terrain over-rider hoop for All Terrain and aluminum XHD modular front bumpers
- Black powdercoated tubular hoop for 2 or 4 door Jeep Wrangler JK
- Bolts to the bumper’s center base section
- Will not fit with a Warn Powerplant W71800 winch
SKU: RUG11542.14 -
Front Bumpers
Rugged Ridge XHD Aluminum Front Bumper Over-Rider Hoop (Black) – 11541.14
- Textured black over-rider hoop for XHD aluminum front bumpers, 2.3 inch tubing
- Bolts on, modular design for the 2007-2018 Jeep Wrangler JK
- Aluminum, powder coat finish
- Winch use needs the optional JK winch mounting plate
SKU: RUG11541.14 -
Front Bumpers
Rugged Ridge Xtreme Heavy Duty Aluminum Front Bumper (Black) – 11541.02
- Xtreme Heavy Duty aluminum front bumper for the 2007-2018 Jeep Wrangler JK
- Textured black powder coat with E-coat undercoating
- Non-winch version with built-in top filler plate
- Cutouts and mounting points for the factory fog lights
SKU: RUG11541.02 -
-
Front Bumpers
Rugged Ridge Double X Striker for Front Modular Bumper (Black) – 11540.25
- Double X Striker for the XHD front modular bumper in textured black
- Made from .120 wall tubing, bumper not included
- Made for CJ5, CJ7, Scrambler and Wrangler YJ, TJ, LJ and JK
- Mounting tabs accept 3/4 inch D-ring shackles
SKU: RUG11540.25 -
Grille Guards
Rugged Ridge Hoop Over-rider for Modular Front Bumper (Polished) – 11540.16
- Polished stainless steel center hoop, 60mm
- Fits Jeep Wrangler JK, LJ and TJ per the manufacturer list
- Adds grille protection to XHD front bumpers 11540.71, 11540.10 and 11540.11
- Direct fit, not weld-on
SKU: RUG11540.16 -
Grille Guards
Rugged Ridge Hoop Over-rider for Modular Front Bumper (Black) – 11540.14
- Fits Jeep CJ5, CJ7, Scrambler and Wrangler YJ, TJ, LJ and JK per the manufacturer list
- Textured black powder-coated steel hoop over-rider
- Bolts directly onto XHD front bumpers
- For 2 and 4-door models
SKU: RUG11540.14
