Overview
The Artec JK3011 is a factory-height front axle armor kit for the Dana 30 JK axle on the Jeep Wrangler JK, 2007-2018. It is a heavy duty, light weight truss and armor system that reinforces the front Dana 30 axle, with a 1/4-inch thick truss top and 10Ga. gussets that strengthen both axle tubes.
Choose the factory-height version when your lift replaces the tracbar and mounts to the factory axle bracket, which is typical with a lift that includes an adjustable tracbar. For a drag link flip, which needs a minimum 3-inch lift and bumpstop extensions, the raised kit JK3010 is the matching choice.
Key features
- 1/4-inch thick truss top for the front axle
- 10Ga. gusseting that strengthens both axle tubes, not only the long tube
- Front lower control arm skids
- Inner C gussets
- Heavy duty factory-height tracbar bracket
- Precision cut and formed components
Choosing between the two heights
The factory-height kit suits builds where the tracbar mounts to the factory axle bracket, which is common with a lift that includes an adjustable tracbar. The bracket keeps the axle locating geometry close to stock, so the armor fits the factory mounting points without relocating the link.
A drag link flip changes where the steering link sits, and that is the situation where the raised kit becomes the better match. Before choosing, check how your lift mounts the tracbar and confirm which bracket height your build calls for.
Front axle armor adds weight and changes how the axle flexes, so check clearance for tires and steering components after installation. Re-check the welds and bracket bolts after the first trail runs.
- Confirm how the tracbar mounts before choosing a height
- Check tire and steering clearance after installing
- Plan welding and fitment work before starting
Specifications
| Brand | Artec Industries |
|---|---|
| Part number | JK3011 |
| UPC | 816791021687 |
| Type | Axle armor kit |
| Fitment type | Vehicle-specific (inferred, see fitment section) |
| Sold as | Single |
| Tube diameter | Any |
| Truss top thickness | 1/4 inch |
| Gussets | 10Ga. |
| Tracbar bracket height | Factory height |
| Raised-height companion kit | A/IJK3010 |
Vehicle fitment
This kit fits the 2007-2018 Jeep Wrangler JK, based on the front Dana 30 JK axle it is made for. It is not narrowed by trim. The Wrangler JL, Gladiator JT and older TJ, LJ and YJ models are not covered.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use the factory-height bracket when the tracbar mounts to the factory axle bracket. If you are doing a drag link flip, use the raised kit A/IJK3010 instead. Expect welding, some grinding and fitment work, since every axle varies slightly and some fabrication may be needed.
What’s included
Front axle truss, front lower control arm skids, inner C gussets and a heavy duty factory-height tracbar bracket.
Not included: Lift components, bumpstop extensions and welding materials are not included.












