Overview
The RE4526 is a set of rear control arm mounts for a 4-link rear suspension on the Jeep JK Wrangler. It is part of the Extreme-Duty long arm system from the Rubicon Express JK suspension line.
The mounts are for 2-door and 4-door models and are used at the rear lower position.
Key features
- Rear 4-link control arm mounts
- Part of the Extreme-Duty long arm system
- Fits 2-door and 4-door Wrangler JK models.
Understanding 4-link geometry
A 4-link rear suspension controls axle wrap, pinion angle and how the axle moves under power and braking. The links carry the forces that a leaf spring would normally handle, so their bushings and ends take steady wear. Worn link ends let the axle move in unplanned directions, which can make the vehicle feel loose on the trail.
When you choose a 4-link setup, match the mounts, links and arms as one system. Mixing parts from different kits can change link lengths and throw off the geometry the mounts were set for. Inspect the link ends, mount welds and bolts after each trip, and retighten hardware once it has settled.
- Check link ends for play before each trip
- Keep the mounts and links from the same system
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE4526 |
| UPC | 614901453492 |
| Position | Rear lower |
| System | 4-link rear, Extreme-Duty long arm |
| Body style | 2-door and 4-door |
Vehicle fitment
It fits the Jeep JK Wrangler, 2007-2018, and is part of the Rubicon Express JK suspension line.
Confirm your vehicle’s year, model and trim before ordering, since this kit is matched to the JK Wrangler.
Installation notes
A 4-link rear system ties the axle to the frame through several links, so the mounts have to be set in the correct location before the arms are fitted. Check the link geometry after installation.
What’s included
The rear control arm mounts for the 4-link system.
Not included: the 4-link arms, the axle and the hardware.




