Overview
The G2 Axle and Gear 35-2037 is a master ring and pinion installation kit for Dana 70 U rear axles. The kit covers the bearings, shims and fasteners for a rear gear set replacement, and the gears are not included.
Match the axle housing and ring gear to this kit before ordering, since the U designation marks a variant to check.
Key features
- Master kit with bearings: pinion and carrier bearings with races
- Shim kit for pinion and carrier setup
- Pinion nut, crush sleeve and pinion seal included
- Ring gear bolts, Loctite, gear marking compound and silicone sealer
Matching the U axle housing
A Dana 70 U housing is best matched by measurement and visual inspection before any parts are ordered. Check the ring gear size, the carrier bearing bores and the pinion bore, then compare them with the kit. The U marker is easy to miss on an older axle, so confirm the markings on the housing before buying.
Once the housing is confirmed, gear work is about shims, preload and tooth contact. Pinion depth is set first, then carrier preload, then backlash, and the tooth pattern is checked with gear marking compound. Make adjustments in small steps and keep notes so the final setup can be repeated if the gears are removed later.
- Mark the housing and carrier before disassembly
- Compare ring gear size with the kit
- Keep notes on every shim change
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 35-2037 |
| UPC | 631410095876 |
| Axle type | Dana 70 U, the U version of the Dana 70 axle |
| Axle location | Rear |
| Popular axle manufacturer | Dana |
| Kit type | Master kit with bearings |
Vehicle fitment
The Dana 70 axle name identifies the axle rather than a vehicle. Confirm the year, model and trim of your vehicle, and confirm the axle, before ordering.
The U marks this axle variant, so compare the axle housing with this kit before ordering.
Installation notes
Rear gear work on a Dana 70 U should be done by someone who can set pinion preload and carrier preload accurately. Set tooth contact with the gear marking compound, then break in the new gears gradually.
What’s included
The kit includes pinion and carrier bearings, a shim kit, pinion nut, crush sleeve, pinion seal, ring gear bolts, Loctite, gear marking compound and silicone sealer.
Not included: the ring and pinion gears.










