Overview
The G2 Axle and Gear 25-2051 is a minor ring and pinion installation kit for the front Dana 44 JK axle on the 2007-2018 Jeep Wrangler JK. Because the bearings are not replaced with this kit, it suits a front axle whose bearings are still good.
The kit contains the parts needed to set up a front ring and pinion: a shim kit, a replacement pinion nut, a crush sleeve, a pinion seal, ring gear bolts, silicone sealer, Loctite and gear marking compound.
Key features
- Minor kit for the front Dana 44 JK axle
- Shim kit, pinion nut, crush sleeve and pinion seal
- Ring gear bolts, silicone sealer, Loctite and gear marking compound
- Front axle location
Things to check
Before starting, look over the front axle for leaks, bent housing sections and worn pinion bearings. A minor kit assumes the bearings are sound, so any roughness or play should be fixed first. Confirm the axle is the front Dana 44 JK unit before buying parts, since the rear axle uses a separate kit.
During the install, keep the gear teeth clean and check the pattern carefully, since shim changes shift the mesh. Ring gear bolts that show stretching, thread damage or corrosion should be replaced rather than reused. The gear set is sold separately, so gears should be inspected and matched before reassembly.
- Confirm front axle location before ordering
- Inspect bearings and seals before reassembly
- Replace damaged ring gear bolts
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 25-2051 |
| UPC | 631410095180 |
| Kit type | Minor kit, bearings not included |
| Axle type | Dana 44 JK |
| Axle location | Front |
| Popular axle maker | Dana |
Vehicle fitment
It is for the front Dana 44 JK axle on the 2007-2018 Jeep Wrangler JK. It does not fit the Wrangler JL or the Gladiator JT. Confirm your vehicle’s year, model and trim before ordering.
It is not for the Wrangler (JL) or the Gladiator (JT). Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Gear setup is measured, not bolted together. Check the tooth contact with the gear marking compound, and set the shims by measurement, by a professional.
What’s included
The kit includes the shim kit, pinion nut, crush sleeve, pinion seal, ring gear bolts, silicone sealer, Loctite and gear marking compound.
Not included: the ring and pinion gear set, which is a separate part.










