Overview
The Currie TJ-RJIIIR4 is a RockJock Dana 60 III rear axle housing, part number TJ-RJIIIR4, for the Jeep TJ. It is a heavy duty housing with brackets welded in place and is designed to bolt in where the factory housing sits.
The housing is a base for a custom axle build, so you fit the internal components you choose. It is designed to take your own gears, shafts and bearings.
Key features
- Heavy duty housing.
- Brackets welded in place
- Designed to bolt in place of the factory housing
- Room to build the axle with your own internal parts
Building the axle around the housing
A bare Dana 60 housing gives you a solid starting point. The gears, carrier, pinion, bearings and seals are fitted by you, so the finished axle is only as good as the parts chosen and the way they are assembled. Ring and pinion backlash and contact pattern are the first checks before the housing is closed up.
Once the housing is in the vehicle, the pinion angle and driveline geometry need attention, because a housing swap changes both. Check the axle shaft ends, brake hardware and parking brake routing as well. Keep the brackets clear of stress when you tighten the housing bolts, and recheck the fasteners after the first drives.
- Gear set matched to the carrier
- Bearings and seals sized for this housing
- Pinion angle set after installation
- Brake lines routed clear of the axle
Specifications
| Brand | Currie |
|---|---|
| Part number | TJ-RJIIIR4 |
| UPC | 700000489461 |
| Position | Rear |
| Housing type | Dana 60 |
| Product line | RockJock Dana 60 III |
| Fitment field | Universal fit, per brand |
Vehicle fitment
It is intended for the 1997-2006 Jeep Wrangler (TJ). It is universal fit, so confirm the match with your axle setup before ordering.
Jeep JK and JL Wrangler models are a different chassis and are not covered by the TJ name. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Have mounting bolts and tools ready before starting, since they are not included. Support the housing on stands, not on the brackets, while it is positioned.
What’s included
The housing ships with its welded brackets. Gears, shafts, bearings and hardware are not included.
Not included: Internal axle components and bolts are needed as separate parts.









