Overview
The Currie RockJock 60, part number CE-KR6301E51, is a complete high-pinion rear axle assembly for the Jeep Wrangler JK. It is built around a radius-bottom center section and comes with an Eaton E-locker and a 5.13 ratio gear set.
The RockJock 60 has a rounded bottom that slides over obstacles, a thick reinforced center section and large diameter tubes.
Key features
- Stage-1 nodular iron high-pinion radius-bottom center section with thicker walls and webbing
- Integrated AR400 hardened steel skid plate
- Eaton E-locker with a 5.13 ratio
- Semi-floating 40-spline axles, 1.7 inches in diameter
- Standard Dana 60 gear set, compatible with super 60 reverse cut gears
- High volume flow-thru recirculating oil system for the pinion bearings
- Large diameter front pinion bearing matched to the rear bearing
- JK tone rings installed for ABS and ESP retention
Gear choice and trail use
A high-pinion rear axle changes how the driveline sits under the body, so the pinion angle and driveshaft length are worth checking when a housing is swapped. Gearing decides how the vehicle pulls at low speed. A numerically higher ratio helps with crawling and climbing, but it also raises engine speed on the highway, so tire size and transmission choice shape how the setup feels day to day.
A locker works differently from an open differential. When one wheel loses grip, a locker sends power to the other side, which helps on rocks and loose surfaces. On pavement, lockers can make turns feel stiff, so many owners use them mainly off road. Fresh fluid after the break-in miles helps the gears and locker last.
Specifications
| Brand | Currie |
|---|---|
| Part number | CE-KR6301E51 |
| UPC | 817783008518 |
| Position | Rear |
| Housing type | RockJock 60, high pinion |
| Gear ratio | 5.13 |
| Locker | Eaton E-locker |
| Axle shafts | Semi-floating, 40-spline, 1.7 inches in diameter, 1350 U-joint |
| Tube diameter | 3 inches, 0.375 wall DOM tube |
| Wheel mounting surface | 68.750-inch WMS |
| Bolt pattern | Dual 5×5 studs installed, holes drilled for 5×5.5 |
| Bearings | 80 tapered roller bearings |
| Differential cover | Nodular iron with gasketed fill plug and dipstick, red |
| Recommended maximum tire size | 37-inch |
Vehicle fitment
The RockJock 60 rear housing fits the 2007–2017 Jeep Wrangler (JK), including the 70th and 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X versions, and the Unlimited versions of each.
Wrangler models from outside 2007 to 2017, including the JL and the earlier TJ, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The package is a complete rear axle assembly that reuses the stock JK rotors, calipers and ABS wheel sensors, so the brake and sensor parts do not need to be bought separately. The recommended maximum tire size is 37 inches, and larger tires are outside the stated configuration.
What’s included
A complete rear axle assembly with the RockJock 60 housing, Eaton E-locker, 5.13 gearing and mounting brackets. The stock JK rotors, calipers and ABS wheel sensors are reused.











