Overview
The Currie JK-RJIIIR4 is a rear axle housing with Dana 60 construction for the Jeep JK Wrangler, part number JK-RJIIIR4. It is a heavy duty housing with brackets welded in place and is designed to bolt in place of the factory housing.
It serves as a starting point for a custom axle, so you can fit the internal parts you choose. It is intended for the 2007-2018 Jeep Wrangler (JK).
Key features
- Rear position with Dana 60 housing type
- Heavy duty build
- Brackets welded in place
- Designed to bolt in place of the factory housing
Driveline and brake checks
A bolt-in housing still changes how the driveline sits under the vehicle. After installation, measure the pinion angle with the vehicle at ride height and compare it with the transfer case output angle. A large mismatch causes vibration and early wear in the driveshaft joints, so correct it before driving far.
Brake lines, ABS wiring and the parking brake cable often need rerouting when the axle is swapped, so trace each line before the wheel goes back on. Check the axle shaft ends and the brake hardware for fit and clearance against the housing. Recheck bolt tightness and the brackets after the first trail runs, since new components settle.
- Pinion angle compared with transfer case output
- Brake lines clear of suspension travel
- Parking brake cable routed freely
- Driveshaft joints checked for play after first drives
Specifications
| Brand | Currie |
|---|---|
| Part number | JK-RJIIIR4 |
| Position | Rear |
| Housing type | Dana 60 |
| Product line | RockJock Dana 60 III |
| Fitment field | Universal fit, per brand |
Vehicle fitment
It is intended for the 2007-2018 Jeep Wrangler (JK) and is universal fit.
The Jeep TJ and Jeep JL Wrangler are different chassis and are not covered by the JK name. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The housing is ready to bolt in, but swaps usually require checking driveline angles and brake line routing afterward. Support the housing securely while it is positioned.
What’s included
The package is the housing and its welded brackets only.
Not included: Internal axle parts and mounting bolts must be sourced separately.









