Brake Controllers & Electrical
Showing 61–72 of 118 resultsSorted by popularity
-
Trailer Connector Kit
Curt Manufacturing Wiring T-Connectors – 55312
- Curt Manufacturing 55312 wiring T-connector with a standard 2-wire system
- Plugs directly into the factory harness
- Includes a 4 pin connector, dust cap and ground wire with self tapping screw
- Curt lists fitment for 1985–1997 Chevrolet and GMC trucks and Suburbans, plus the S10, Sonoma, Jimmy, Syclone and Isuzu Hombre
SKU: CRT55312 -
Trailer Brake Control Wire Harness
Curt Manufacturing Wiring Harness – 56274
- Fits 2015–2017 Jeep Renegade per the manufacturer fitment list
- CURT wiring harness 56274, part number CRT56274
- 4-way flat socket for tail, brake and turn signal circuits
- Powered 3-wire to 2-wire tail light converter with circuit protection
- Plug-and-play: no cutting, splicing or soldering
- Includes dust cover; limited one-year warranty
SKU: CRT56274 -
Trailer Wire Mounting Bracket
Curt Manufacturing Vehicle To Trailer Connector with Harness – 56281
- Fits 2014–2015 and 2017–2018 INFINITI QX60 (Base, Hybrid)
- Fits 2013–2018 Nissan Pathfinder in several trims
- 4-way flat output; signal circuits rated 7.5 amps per side
- Tail and running circuits rated 7.5 amps total; install time 30 min.
SKU: CRT56281 -
Trailer Connector Kit
Curt Manufacturing Vehicle To Trailer Connector with Harness – 56096
- Fits 2010–2016 Cadillac SRX Base, Luxury, Performance and Premium
- Plugs into existing vehicle socket for a 4-way flat trailer socket
- Dust cover included; plug-and-play, no splicing
- Install time 5 min.; made in USA; part number CRT56096
SKU: CRT56096 -
-
Trailer Wire Mounting Bracket
Curt Manufacturing Trailer Wire Connector Bracket – 57208
- Curt Manufacturing trailer wire connector bracket, part number CRT57208
- Brand: Curt Manufacturing, catalogued under brake controllers and electrical
- Universal fit; no specific vehicle year, make or model applies
SKU: CRT57208 -
-
Trailer Brake Control Wire Harness
Curt Manufacturing Trailer Brake Controller Harness – 51456
- Universal fit quick plug trailer brake controller harness
- Part number CRT51456 from Curt Manufacturing
- Two plugs: original equipment socket and CURT brake controller
- Two feet of wire with slit loom sleeve
SKU: CRT51456 -
Trailer Wire Harness
Curt Manufacturing Towed-Vehicle RV Harness Add-On – 58920
- Curt Manufacturing 58920 towed-vehicle RV harness add-on, part CRT58920
- Adds a 4-Way flat connection to any Curt RV harness
- Works with a 3-Wire system and battery connection
- Universal Fit, not tied to particular vehicles
SKU: CRT58920 -
-
Trailer Wire Harness
Curt Manufacturing Towed-Vehicle RV Harness – 58909
- Towed-vehicle RV harness with standard 4-way flat trailer plug
- Fits 2014–2017 Jeep Cherokee (KL), 2016 Jeep Cherokee (XL) and 2018 Jeep Cherokee
- Integrated block diodes isolate vehicle electronics from RV signals
- Uses the vehicle’s existing taillights, brake lights and turn signals
SKU: CRT58909
What belongs in this category
Trailer electrical covers everything between the tow vehicle and the trailer's lights and brakes. That includes brake controllers and their mounting brackets, vehicle-specific wiring harnesses, flat and round plug connectors, extension cables, T-connectors, circuit breakers, testers, dust covers and breakaway systems. A light trailer may need only a 4-way harness for tail, brake and turn lights, while a trailer with electric brakes needs a brake controller and a 7-way connection.
Connector types
- 4-way flat: tail lights, brake lights and turn signals for light utility trailers.
- 5-way flat: adds a fifth wire, often used for reverse lockout or auxiliary functions.
- 6-way and 7-way: add circuits for electric brakes, a battery charge line and reverse lights. Round 7-way blades are common on heavier trailers.
Confirm the plug on your trailer and the socket on your vehicle before choosing adapters.
Brake controllers
A brake controller sends a regulated signal to a trailer's electric brakes when you press the pedal. Time-delayed controllers apply a preset output after a delay, while proportional controllers sense deceleration and scale braking to match. Plug-in or vehicle-specific harnesses can make installation cleaner than splicing, and mounting brackets keep the controller within easy reach of the driver. Always follow the manufacturer's setup procedure and test braking at low speed before towing a load.
Wiring harnesses and converters
- Custom harnesses: plug into the vehicle's tail light circuit or an existing tow package connector with no cutting.
- T-connectors: splice lighting circuits without cutting factory wires.
- Converters: adapt a three-wire vehicle system to a separate trailer signal circuit.
- Testers: a simple tester can confirm each circuit before a trip.
Safety and compatibility
Trailer brakes and lights are safety equipment, and laws on trailer brakes and breakaway systems vary by state and trailer weight. Check local regulations. A breakaway kit applies the trailer brakes if it separates from the tow vehicle, and its battery should be kept charged. Use wire and fuses rated for the load, secure connections against moisture, and keep plugs covered when not in use.
Harnesses are usually specific to model year and trim, so confirm fitment for your exact vehicle and the manufacturer's specifications. Then compare the products below.
Inspection routine before towing
Make a habit of checking the electrical connection every trip. Plug in the trailer, then have a helper confirm running lights, left and right turn signals and brake lights. Test the brake controller's manual lever to confirm the trailer brakes respond before you pull out. Look for frayed insulation, loose pins and corrosion in plug sockets, and apply a light coat of dielectric grease to the contacts.
Keep the connector off the ground when unhitched, and fit a dust cover so water and grit stay out. A small spare fuse kit and a tester are worth keeping in the glovebox.
Wire gauge matters as well. Brake circuits carry real current, so undersized wire can drop voltage and weaken braking. Follow the controller maker's gauge and fuse recommendations, keep wiring away from exhaust heat and moving parts, and use sealed or heat-shrink connections where moisture can reach them. Recheck connections periodically, since vibration loosens crimps over time.
Popular Brake Controllers & Electrical brands
- Curt Manufacturing (82)
- Redarc (14)
- Tekonsha (10)
- Tow Ready (8)
- Smittybilt (1)
- Rugged Ridge (1)
- B&M (1)
- Reese (1)
Shop Brake Controllers & Electrical by type
- Trailer Connector Kit (52)
- Trailer Brake Control Wire Harness (31)
- Trailer Wire Harness (11)
- Trailer Brake Controlers (5)
- Trailer Wire Mounting Bracket (4)
- Brake Controller Mounting Brackets (3)
- Trailer Wire Circuit Breaker (1)
- Brake Light Converter (1)
- Towing Light (1)
- Brake Launch Control (1)
Brake Controllers & Electrical FAQ
Do I need a brake controller for my trailer?
If the trailer has electric brakes, yes, because the tow vehicle has to send them a signal. Trailers with surge brakes or no brakes do not use one. Check your trailer's braking type and your local rules.
What is the difference between a 4-way and 7-way connector?
A 4-way flat plug carries tail, brake and turn signals. A 7-way adds circuits for electric brakes, a charge line, reverse lights and auxiliary power, which suits heavier trailers and campers.
What does a breakaway kit do?
If the trailer separates from the tow vehicle, the breakaway switch pulls a pin and sends battery power to the trailer's brakes. The kit includes a battery, which must be kept charged to work when needed.
Can I install a plug-in wiring harness myself?
Many custom harnesses are plug-and-play and need no splicing, so they are within reach of a careful DIYer. Confirm the connector match, follow the instructions, and test lights and brakes before towing. A shop can help with controller wiring.











