Brake Controllers & Electrical
Showing 73–84 of 118 resultsSorted by popularity
-
Trailer Break Away Safety Systems
Curt Manufacturing Soft-Trac I Breakaway Kit with Charger – 52040
- Universal fit for trailers with electric trailer brakes
- Soft-Trac I breakaway kit with charger, part number CRT52040
- 12-volt, 5-amp rechargeable battery with 12-volt charger
- Nylon breakaway switch with 48-inch lanyard
- Lockable top-load battery case
SKU: CRT52040 -
Trailer Connector Kit
Curt Manufacturing Replacement OEM Tow Package Wiring Harness – 56042
- Replacement OEM tow package wiring harness for 2008–2019 Toyota Highlander
- Plugs into the existing vehicle socket to provide a 4-way flat socket
- Plug-and-play design, no splicing; standard 2-wire system
- Dust cover included; install time 20 min.
- Made in USA; part number CRT56042
SKU: CRT56042 -
-
-
Trailer Brake Controlers
Curt Manufacturing Echo Mobile Brake Controller – 51180
- Curt Manufacturing Echo Mobile brake controller, part number CRT51180
- Connects wirelessly to a smartphone to control and monitor trailer brakes
- Customizable app for Apple or Android phones
- Portable design for switching between vehicle-trailer combinations
- Durable, weather-resistant construction; Universal Fit marking
SKU: CRT51180 -
Trailer Connector Kit
Curt Manufacturing Custom Wiring Connector – 56420
- Fits 2019–2021 Hyundai Santa Fe, 2020–2021 Hyundai Palisade, 2022 Hyundai Tucson and 2020–2021 Kia Telluride
- Plugs into the OEM vehicle socket for a 4-way flat trailer output
- Requires the factory (OEM) tow package
- Includes a tail light converter and rubber dust cover
- Part number CRT56420
SKU: CRT56420 -
Trailer Wire Harness
Curt Manufacturing Custom Towed-Vehicle RV Wiring Harness – 58963
- Fits the 2019–2021 Jeep Cherokee in the listed trims
- Towed-vehicle RV wiring harness, part number CRT58963
- 4-way flat connector for dinghy towing
- Uses the existing tail lights, turn signals and brake lights
- Includes 4-way flat extension, mounting bracket and hardware
SKU: CRT58963 -
Trailer Connector Kit
Curt Manufacturing Custom 4-Way Wiring Harness – 56426
- Fits 2014–2021 Jeep Grand Cherokee and 2021 Grand Cherokee L in the trims shown
- Curt 4-way flat wiring harness, part number CRT56426
- Plugs into the taillight assembly; plug-and-play, no cutting or splicing
- Includes tail light converter, fuse holder and battery connection wiring
- Battery connection must be fuse-protected, 10-amp maximum
SKU: CRT56426 -
Trailer Connector Kit
Curt Manufacturing Custom 4-Way Flat Wiring Harness – 56452
- Manufacturer fitment list names the 2020–2021 Toyota Highlander
- Part number CRT56452, Curt custom 4-way flat wiring harness
- Tail light converter and fuse holder with battery wiring included
- Battery connection must be fuse-protected, 10-amp max
- Check your vehicle against the 2020–2021 Toyota Highlander trims before buying
SKU: CRT56452 -
Trailer Connector Kit
Curt Manufacturing Custom 4-Way Flat Wiring Harness – 56027
- Fits the 2008–2012 Buick Enclave and 2010–2012 Chevrolet Traverse
- Part number CRT56027, Curt custom 4-way flat wiring harness
- Plugs into the taillight assembly with no cutting or splicing
- Dust cover and CURT Easy-Mount bracket described
- Confirm the trim before ordering, especially LTZ
SKU: CRT56027 -
Trailer Brake Control Wire Harness
Curt Manufacturing Brake Control Adapter Harness – 51522
- Quick plug brake control adapter harness, part CRT51522
- One plug fits the vehicle’s original equipment socket; the other connects to any Curt brake controller
- Two feet of wire with slit loom sleeve
- Copy states installation takes less than 10 minutes
SKU: CRT51522
What belongs in this category
Trailer electrical covers everything between the tow vehicle and the trailer's lights and brakes. That includes brake controllers and their mounting brackets, vehicle-specific wiring harnesses, flat and round plug connectors, extension cables, T-connectors, circuit breakers, testers, dust covers and breakaway systems. A light trailer may need only a 4-way harness for tail, brake and turn lights, while a trailer with electric brakes needs a brake controller and a 7-way connection.
Connector types
- 4-way flat: tail lights, brake lights and turn signals for light utility trailers.
- 5-way flat: adds a fifth wire, often used for reverse lockout or auxiliary functions.
- 6-way and 7-way: add circuits for electric brakes, a battery charge line and reverse lights. Round 7-way blades are common on heavier trailers.
Confirm the plug on your trailer and the socket on your vehicle before choosing adapters.
Brake controllers
A brake controller sends a regulated signal to a trailer's electric brakes when you press the pedal. Time-delayed controllers apply a preset output after a delay, while proportional controllers sense deceleration and scale braking to match. Plug-in or vehicle-specific harnesses can make installation cleaner than splicing, and mounting brackets keep the controller within easy reach of the driver. Always follow the manufacturer's setup procedure and test braking at low speed before towing a load.
Wiring harnesses and converters
- Custom harnesses: plug into the vehicle's tail light circuit or an existing tow package connector with no cutting.
- T-connectors: splice lighting circuits without cutting factory wires.
- Converters: adapt a three-wire vehicle system to a separate trailer signal circuit.
- Testers: a simple tester can confirm each circuit before a trip.
Safety and compatibility
Trailer brakes and lights are safety equipment, and laws on trailer brakes and breakaway systems vary by state and trailer weight. Check local regulations. A breakaway kit applies the trailer brakes if it separates from the tow vehicle, and its battery should be kept charged. Use wire and fuses rated for the load, secure connections against moisture, and keep plugs covered when not in use.
Harnesses are usually specific to model year and trim, so confirm fitment for your exact vehicle and the manufacturer's specifications. Then compare the products below.
Inspection routine before towing
Make a habit of checking the electrical connection every trip. Plug in the trailer, then have a helper confirm running lights, left and right turn signals and brake lights. Test the brake controller's manual lever to confirm the trailer brakes respond before you pull out. Look for frayed insulation, loose pins and corrosion in plug sockets, and apply a light coat of dielectric grease to the contacts.
Keep the connector off the ground when unhitched, and fit a dust cover so water and grit stay out. A small spare fuse kit and a tester are worth keeping in the glovebox.
Wire gauge matters as well. Brake circuits carry real current, so undersized wire can drop voltage and weaken braking. Follow the controller maker's gauge and fuse recommendations, keep wiring away from exhaust heat and moving parts, and use sealed or heat-shrink connections where moisture can reach them. Recheck connections periodically, since vibration loosens crimps over time.
Popular Brake Controllers & Electrical brands
- Curt Manufacturing (82)
- Redarc (14)
- Tekonsha (10)
- Tow Ready (8)
- B&M (1)
- Reese (1)
- Smittybilt (1)
- Rugged Ridge (1)
Shop Brake Controllers & Electrical by type
- Trailer Connector Kit (52)
- Trailer Brake Control Wire Harness (31)
- Trailer Wire Harness (11)
- Trailer Brake Controlers (5)
- Trailer Wire Mounting Bracket (4)
- Brake Controller Mounting Brackets (3)
- Trailer Wire Circuit Breaker (1)
- Brake Light Converter (1)
- Towing Light (1)
- Brake Launch Control (1)
Brake Controllers & Electrical FAQ
Do I need a brake controller for my trailer?
If the trailer has electric brakes, yes, because the tow vehicle has to send them a signal. Trailers with surge brakes or no brakes do not use one. Check your trailer's braking type and your local rules.
What is the difference between a 4-way and 7-way connector?
A 4-way flat plug carries tail, brake and turn signals. A 7-way adds circuits for electric brakes, a charge line, reverse lights and auxiliary power, which suits heavier trailers and campers.
What does a breakaway kit do?
If the trailer separates from the tow vehicle, the breakaway switch pulls a pin and sends battery power to the trailer's brakes. The kit includes a battery, which must be kept charged to work when needed.
Can I install a plug-in wiring harness myself?
Many custom harnesses are plug-and-play and need no splicing, so they are within reach of a careful DIYer. Confirm the connector match, follow the instructions, and test lights and brakes before towing. A shop can help with controller wiring.











