Shock boots keep grit and water off a lifted shock's shaft and seal. How to size, vent and inspect one, when it can trap…
Shock Absorbers
Showing 913–924 of 3453 resultsSorted by popularity
-
Shock Absorbers
Skyjacker Softride Nitro Shock Absorber – N8015
- Fits 1999–2004 Jeep Grand Cherokee (WJ) per the manufacturer fitment list
- Front Skyjacker Softride Nitro shock, part number N8015
- Twin tube, gas charged with 150 PSI nitrogen
- Collapsed length 11.52 in., extended length 18.66 in., stroke 7.14 in.
- Urethane bushings and a red polyurethane boot
SKU: SKYN8015 -
Shock Absorbers
Skyjacker Softride Nitro Shock Absorber – N8014
- Fits 1965–1979 Ford F-250 and 1979 Ford F-350 per the manufacturer fitment list
- Skyjacker Softride Nitro front shock absorber, part number N8014
- Gas-charged twin tube design with 150 PSI nitrogen gas
- 5/8 in. hardened, double chrome piston rod
- Red polyurethane bushings and a red boot
SKU: SKYN8014 -
Shock Absorbers
Skyjacker Softride Nitro Shock Absorber – N8012
- Rear gas-charged shock from the Softride Nitro Series, part number N8012
- 150 PSI nitrogen gas charge with twin tube construction
- Collapsed length 12.07 in., extended length 19.07 in., 7 in. stroke
- Hardened, double chrome 5/8 in. rod with red boot included
- No vehicles listed; confirm fitment before ordering
SKU: SKYN8012 -
Shock Absorbers
Skyjacker Softride Nitro Shock Absorber – N8009
- Front shock for 1999–2006 Chevrolet Silverado 1500 and GMC Sierra 1500, plus other listed GM trucks and SUVs
- Part number N8009, Skyjacker Softride Nitro Series
- 150 PSI nitrogen gas charge with twin tube construction
- 5/8 in. hardened, double chrome piston rod
- Lift range 0 to 1 in.; red boot included
SKU: SKYN8009 -
Shock Absorbers
Skyjacker Softride Nitro Shock Absorber – N8008
- Rear shock for 1984-2001 Cherokee XJ and 1997-2005 Wrangler TJ/LJ (see list)
- 150 PSI nitrogen gas, twin tube, 12.07 inch collapsed, 19.07 inch extended
- 7 inch stroke, urethane bushings, red polyurethane boot
- For vehicles with 0 inch lift or drop, sold individually
SKU: SKYN8008 -
Shock Absorbers
Skyjacker Softride Nitro Shock Absorber – N8007
- Rear Softride Nitro shock, part N8007, for 2007-2018 Jeep Wrangler JK 2-door and 4-door models
- Listed trims include Rubicon, Sahara, Sport, X and Unlimited versions
- 150 PSI nitrogen gas, twin tube, multi-stage valving
- Internal rebound bumper and urethane bushings
- Collapsed, extended and stroke dimensions are OEM
SKU: SKYN8007 -
Shock Absorbers
Skyjacker Softride Nitro Shock Absorber – N8005
- Fits 2007–2018 Jeep Wrangler (JK) models in 2 and 4-door bodies
- Part number N8005, UPC 803696206622
- Front twin tube gas shock with a 150 PSI nitrogen charge
- Multi-stage velocity sensitive valving and oversized piston head
- Each unit is one shock absorber
SKU: SKYN8005 -
Shock Absorbers
Skyjacker Softride Nitro Shock Absorber – N8003
- Front Softride Nitro twin-tube shock, part N8003, rated for 2 in. lift
- Fits Chevrolet and GMC 1500 trucks from 1999 to 2007, plus Hummer H3 2006-2010
- 150 PSI nitrogen gas with bonded iron piston
- Includes red boot and red polyurethane bushings
- UPC 803696184296
SKU: SKYN8003 -
Shock Absorbers
Skyjacker Softride Nitro Shock Absorber – N8002
- Front Softride Nitro twin-tube shock, part N8002, Nitro Series
- Fits 1986-1989 Toyota 4Runner (DLX, SR5) and 1986-1995 Toyota Pickup
- 150 PSI nitrogen gas, bonded iron piston, chromed piston rod
- Red polyurethane bushings and red boot included
- Rated for 0 to 2 in. lift
SKU: SKYN8002 -
Shock Absorbers
Skyjacker Softride Nitro Shock Absorber – N8001
- Front Softride Nitro twin-tube shock, part N8001, 150 PSI nitrogen gas pressurized
- Fits 2007-2018 Jeep Wrangler JK, including Unlimited models with Rubicon, Sahara and Sport trims
- Multi-stage velocity sensitive valving and oversized piston head
- Collapsed length 12.07 in., extended length 19.07 in.
- Includes red boot and limited lifetime warranty
SKU: SKYN8001 -
Shock Absorbers
Skyjacker M95 Performance Monotube Shock Absorber – M9599
- Rear Skyjacker M95 monotube shock, part M9599, rated for 8.5 in. lift
- Fits the rear position on 2005-2016 Ford F-250 Super Duty and 2005-2014 F-350 Super Duty
- Gas charged, 46mm bore, internal bump stop
- 180-degree directional mounting
- UPC 803696211756
SKU: SKYM9599 -
Shock Absorbers
Skyjacker M95 Performance Monotube Shock Absorber – M9596
- Fits 1999–2006 Chevrolet and GMC 1500 trucks and SUVs, plus 2007 Classic models
- Part number M9596, UPC 803696211749
- Gas charged monotube front shock with a 46mm bore
- Designed for vehicles with a 5 to 6 inch lift
- Quantity: one shock absorber each
SKU: SKYM9596
What a shock absorber does
A shock absorber is a damper. The spring holds the vehicle up, and the shock controls how fast that spring moves. Without working dampers a truck bounces repeatedly after every bump, tires lose contact with the ground, and braking and steering suffer. Off-road, shocks also absorb heat from constant motion, which is why fade becomes a concern on long, rough stretches.
Key specifications to compare
- Collapsed and extended length: These two numbers set the travel (extended minus collapsed). The shock must be long enough that it never limits suspension travel or bottoms out before the bump stops do, and short enough that it is not the first thing to run out at full droop.
- Mounts: Bar pin, stem, eyelet and bolt-in ends are not interchangeable without hardware. Match both the upper and lower mount styles to your vehicle.
- Body design: Monotube shocks usually run cooler and resist foaming better. Twin-tube shocks are common as stock replacements and are often quieter and lower in cost. Many listings state the body diameter, such as a 46mm smooth body.
- Reservoir: An external reservoir adds oil volume and gas capacity, which helps with heat in hard or sustained use.
- Shaft diameter: A larger shaft is generally more resistant to bending.
Choosing for your use
For a daily driver with a modest lift, a quality non-adjustable monotube or gas-charged twin-tube shock sized for your lift height is usually enough. If you tow, carry a heavy bumper and winch, or run fast desert roads, look at larger bodies, reservoirs and tunable valving. Pair the shock with the right spring rate; a shock cannot make up for a spring that is too soft or too stiff for the load.
Fitment and installation
Shocks are specific to lift height, axle and whether they are front or rear, so confirm fitment for your exact year, make and model and check the manufacturer's specifications. Replace shocks in axle sets, since one new and one worn shock gives uneven handling. Support the axle before removal so it cannot droop and stretch brake lines, and tighten fasteners to the specified torque. If you changed ride height, have the alignment checked afterward.
A final point on tuning: if a shock offers adjustable damping, change one setting at a time and note the result on a familiar road. Heavier loads, such as a winch bumper, roof tent or camping gear, often call for firmer valving than an empty truck. Inspect boots, bushings and mounting hardware at every oil change, since a worn bushing can mimic a failing shock.
Mistakes to avoid
The most common error is choosing shocks by brand or price without checking the length numbers. A shock that is too short lets the axle droop until the springs unseat or brake lines tighten, while one that is too long bottoms out and can bend the shaft or damage the mounts. Measure from mount to mount at ride height, then at full droop and full compression, and compare with the listed collapsed and extended lengths.
- Do not ignore worn bushings, since new shocks with tired bushings still clunk.
- Do not use a shock as a travel limiter; bump stops and limit straps do that job.
- Do not install shocks with the vehicle hanging from the frame and the springs unloaded, because mounts then sit in the wrong position.
Test drive on a familiar road after installation and listen for rattles before heading onto the trail.
Related guides
- Shock Boots: Why Every Lifted Shock Needs One
- Jeep JK Lift Heights: 2.5 vs 3.5 vs 4.5 Inch Compared
Jeep JK lift heights compared: the tires 2.5, 3.5 and 4.5-inch lifts clear, the track bars, arms, lines and driveshafts each needs, and which…
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
- Bilstein 5100 vs Fox 2.0 Performance: Which Shock for Your Lifted Truck or Jeep
Bilstein 5100 vs Fox 2.0 Performance: body, shaft, reservoir, travel and lift ratings across 417 part numbers, which trucks and Jeeps both fit, how…
Popular Shock Absorbers brands
- Pro Comp Suspension (898)
- Bilstein (615)
- Rancho (567)
- Fox Racing Shox (345)
- Skyjacker (279)
- Fabtech (232)
- ARB 4x4 Accessories (136)
- FOX (85)
- ICON Vehicle Dynamics (84)
- Rubicon Express (78)
- Icon Suspension (77)
- King Shocks (71)
Shock Absorbers FAQ
How do I know when shocks are worn out?
Common signs are oil leaking down the body, a bouncy or floaty ride, nose dive under braking, uneven tire wear and clunking from the mounts. A worn shock may also feel hot or weak when you compare it with a new one.
What is the difference between monotube and twin-tube shocks?
A monotube has a single working chamber with a floating piston separating oil and gas, which tends to shed heat well. A twin-tube uses an inner and outer tube and is common in factory-style replacements. Both can work well when matched to the vehicle.
Do I need new shocks after a lift?
Usually yes. A lift changes the distance between the mounts, so stock shocks may limit travel or bottom out. Choose shocks whose collapsed and extended lengths suit your lift height, and confirm the specifications with the manufacturer.
Should shocks be replaced in pairs?
Yes, replace both shocks on an axle together. Mixing new and worn dampers makes the two sides react differently, which affects handling and braking stability, especially on rough surfaces.















