Overview
The Fox Racing Shox 2.0 Series emulsion shock with remote reservoir, part number 980-02-029, is a gas charged damper with 5.0 in of travel. It belongs to the 2.0 Coilover Res series and is a universal fit, so no specific vehicle is named.
The remote reservoir is listed at 2.0 in x 8.00 in and is separate from the shock body. Fox says its shocks can be valved for specific driving needs and that it has made shocks for 30 years. The shaft, mounting and length figures are set out in the table below.
Key features
- 5.0 in of travel
- Remote reservoir listed at 2.0 in x 8.00 in
- 5/8 in shaft diameter
- 1/2 inch bolt / heim mounting
- Black and zinc finish
Reservoir placement and hose routing
A remote reservoir gives the damper room to work without the bulk of a body-mounted reservoir. Because the reservoir is a separate piece, the hose needs a path that stays clear of tires, the frame, exhaust and steering through full compression and extension. Plan the reservoir location before drilling or bolting anything. A spot higher on the chassis often keeps the hose away from mud and rocks.
The hose should never be stretched or kinked. Use clamps and grommets where the line passes through brackets, and leave enough slack for the full range of suspension movement. Inspect the hose and fittings after rough trips, since a damaged line can cause a fast loss of damping. Clean the reservoir cap and fittings before opening anything.
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 980-02-029 |
| UPC | 70000375547 |
| Series | 2.0 Coilover Res |
| Body diameter | 2.0 in |
| Travel | 5.0 in |
| Reservoir | 2.0 in x 8.00 in |
| Shaft diameter | 5/8 in |
| Extended length | 15.75 in |
| Collapsed length | 10.65 in |
| Mounting | 1/2 inch bolt / heim |
| Charge | Gas charged |
| Finish | Black and zinc |
Vehicle fitment
It is a universal fit, so no year, make or model is set for it. Compare the 15.75 in extended and 10.65 in collapsed lengths with your mounting points and the space around your suspension before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Route the remote reservoir hose and mount the reservoir where it clears the frame and body through full compression and extension. A 5.0 in travel leaves little room for error in hose placement.
What’s included
Confirm the hardware on hand matches your mounting plan before fitting.








