Overview
The Fox Racing Shox 2.0 Series Emulsion Shock with Remote Reservoir, part number 980-02-034, is a gas charged shock with a 2.0 in body and 12.0 in of travel. Fox states universal fit and names no vehicle, so the shock must be matched to your own mounting points and length.
The shock has a black and zinc finish, a 5/8 in shaft and 1/2 in bolt / heim mounting. Its extended length is 31.10 in and its collapsed length is 19.10 in, and the reservoir measures 2.0 x 11.00 in.
Key features
- 12.0 in travel from a 2.0 in body diameter
- 5/8 in shaft diameter
- 1/2 in bolt / heim mounting
- Black and zinc finish with a remote reservoir design
Choosing a shock length
A remote reservoir shock is a long-travel damper where the oil reservoir sits apart from the body and connects by a hose. That separation gives the shock room to stay cooler under repeated hard use, which is why this style is common on trail and desert builds. Length is the first thing to sort out. The shock has to reach both mounting points through its full range of movement without bottoming out or running out of stroke.
Mounting style matters as much as length. Bolt or heim ends should match the brackets on the axle and frame, and worn bushings or bent brackets can cause binding. After the first trail runs, recheck fasteners and hose clamps.
- Measure both mounting centers before ordering
- Check reservoir hose routing against steering and drivetrain parts
- Inspect the reservoir mount for cracks after rough trips
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 980-02-034 |
| UPC | 70000375552 |
| Shock series | 2.0 Coilover Res |
| Design | Emulsion with remote reservoir |
| Hydraulic / gas charged | Gas charged |
| Finish | Black and zinc |
| Body diameter | 2.0 in |
| Travel | 12.0 in |
| Reservoir length | 2.0 x 11.00 in |
| Shaft size | 5/8 in diameter |
| Extended length | 31.10 in |
| Collapsed length | 19.10 in |
| Mounting | 1/2 in bolt / heim |
| Fitment | Universal fit |
Vehicle fitment
No year, make, model or trim applies to part 980-02-034. It is a universal fit shock, so it is not built for one specific vehicle.
Universal fit does not confirm your mounting points. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare the 19.10 in collapsed and 31.10 in extended lengths against your mounting points and suspension travel before installing. Check that the 1/2 in bolt / heim mounting matches your brackets.
What’s included
The shock is the main item in this part. Check the package contents against your installation before starting.
Not included: Confirm whether mounting hardware is included before ordering.







