Overview
The Fox Racing Shox 2.0 Series Emulsion Shock with Remote Reservoir, part number 980-02-030, is a gas charged shock in the 2.0 Coilover Res series. Fox states universal fit and names no vehicle, so check the shock’s dimensions and mounting against your build.
A remote reservoir mounts the gas reservoir separately from the shock body. The 2.0 line can be valved to match a range of driving needs.
Key features
- Remote reservoir design.
- Gas charged body
- 2.0 Coilover Res series from Fox Racing Shox
- Mounting options and valving can be chosen to suit the application.
Space for a remote reservoir
A remote reservoir needs its own mounting location, so think about the layout of the whole system before installing the shock. The reservoir should sit where it is protected from debris and heat sources, and where the mount can be reached for checks. A lower mount may leave the reservoir exposed, while a higher mount can make the hose longer than necessary. Consider the frame, body panels and steering components together.
Look for hose wear where it passes through brackets, especially after trail runs with heavy compression. Gas charged shocks depend on sealed fittings, so any drip near the reservoir or body should be dealt with quickly. Keep the mounting hardware tight and check it after the first few drives. Replacing a worn bushing or bracket during a shock job saves a second teardown later.
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 980-02-030 |
| UPC | 70000375548 |
| Shock series | 2.0 Coilover Res |
| Design | Emulsion with remote reservoir |
| Hydraulic / gas charged | Gas charged |
| Fitment | Universal fit |
Vehicle fitment
It is a universal fit, so no year, make, model or trim is tied to part 980-02-030. Match the mounting points and length to your own vehicle.
Universal fit does not confirm mounting points for any single vehicle. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A remote reservoir needs its own mounting location and line routing, so plan clearance for the reservoir as well as the shock body before installing.
What’s included
Lay out the hardware and fittings before mounting the shock.
Not included: Confirm the fasteners you need for the reservoir and shock body before starting.








