Overview
The Fox Racing Shox 2.0 Series emulsion shock with remote reservoir, part number 980-02-031, offers 8.5 in of travel in the 2.0 Coilover Res series. It is a universal fit, so no particular vehicle is named.
The shock pairs a 2.0 in body with a remote reservoir listed at 2.0 in x 8.00 in. Its 5/8 in shaft and 1/2 inch bolt / heim mounting make it a fit-by-measurement part, so the lengths below matter more than any vehicle name.
Key features
- 8.5 in of travel
- Remote reservoir at 2.0 in x 8.00 in
- 5/8 in shaft diameter
- 1/2 inch bolt / heim mounting
- Gas charged, black and zinc finish
Long travel shock setup
Long travel gives a suspension room to absorb larger impacts before it reaches the end of its stroke. The trade-off is that the shock needs matching extended and collapsed lengths, so the full range of motion fits the suspension geometry. A longer stroke also puts more load on the mounting points and hose routing, so check clearances at both ends of the travel. Plan for a gap at each end of the stroke.
On a build with a lift or longer control arms, confirm that the reservoir and its hose still clear the tires and frame at full extension. Worn bushings at the mounts can let the shock move out of line, which shortens its life. Inspect the body for scrapes and look for seepage around the seals after rough runs. Replacing mounts and hardware before a shock swap helps keep the new shock running true.
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 980-02-031 |
| UPC | 70000375549 |
| Series | 2.0 Coilover Res |
| Body diameter | 2.0 in |
| Travel | 8.5 in |
| Reservoir | 2.0 in x 8.00 in |
| Shaft diameter | 5/8 in |
| Extended length | 22.80 in |
| Collapsed length | 14.30 in |
| Mounting | 1/2 inch bolt / heim |
| Charge | Gas charged |
| Finish | Black and zinc |
Vehicle fitment
It is a universal fit with no named year, make or model. Measure your mounting points against the 22.80 in extended and 14.30 in collapsed lengths before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mount the remote reservoir so its hose has enough slack through the full 8.5 in of travel without rubbing on the frame or body.
What’s included
Take inventory of the hardware and reservoir hose before mounting.









