Overview
The Fox Racing Shox 980-02-004 is a 2.0 Series coilover shock with 10 in of travel, a non-reservoir gas-charged body and a 2.0 in body diameter. It is intended for trail and desert builds that need a longer stroke, from daily-driven rigs to dedicated off-road vehicles.
Its 2.0 Coilover models include a wide choice of settings for different terrain, and the spring and shock pairings are tuned together by engineers. It is a universal fit shock with no specific vehicles named.
Key features
- 10 in of travel with a 26.65 in extended length
- Non-reservoir, gas-charged construction
- 2.0 in body diameter and .625 in shaft
- Heim mounting with a 1/2 in bolt
- Black and zinc finish
- Tuning options across the 2.0 Coilover range
Choosing a longer stroke
A longer-stroke coilover gives the suspension more room to cycle over rough ground, but that room has to be used properly. At full extension the shock should not bottom out against the mounts, and at full compression the body and lines should clear the frame, skid plates and tires. Measure the installed length at ride height, then again with the wheels hanging, before deciding the shock is right.
Longer shocks are often paired with new springs, bump stops and upper mounts, since older parts were designed around a shorter stroke. Check how the non-reservoir body fits your shock tower and how the Heim ends sit against their bushings. Keep spare bolts and a torque wrench handy for the first few trail runs, and recheck them after rough sections.
- Measure installed length at ride height
- Check frame and skid plate clearance
- Inspect Heim joints for play after outings
- Review bump stop contact at full droop
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 980-02-004 |
| UPC | 70000375558 |
| Series | 2.0 Series Coilover |
| Shock type | Emulsion, non-reservoir |
| Body diameter | 2.0 in |
| Travel | 10 in |
| Shaft diameter | .625 in |
| Extended length | 26.65 in |
| Collapsed length | 16.65 in |
| Charge | Gas charged |
| Mounting | 1/2 in bolt with Heim |
| Finish | Black and zinc |
Vehicle fitment
It is universal fit, so it is not tied to a year, make or model. Compare its 26.65 in extended length and 16.65 in collapsed length with your current ride height and clearances before fitting.
No models are named for this shock. Verify year, model and trim against your truck before you order.
What’s included
Confirm the contents of the box against your installation plan before fitting the shock.









