Overview
The Skyjacker Black Max B8556 is a front replacement shock absorber for a 2–2.5 inch lift, part of the Black Max B8500 series. It fits classic Ford Bronco and F-Series trucks, the 1987–1995 Jeep Wrangler YJ, 1980–1985 Toyota pickups and 4Runners, and the 2005–2018 Toyota Tacoma.
The shock is a twin tube hydraulic design with vehicle-specific multi-stage valving and increased fluid capacity to help it shed heat. A foam cell inside the body compresses as the oil heats and expands, which Skyjacker says keeps performance steady across temperature changes. A black boot comes with the shock.
Key features
- Vehicle-specific multi-stage valving
- Increased fluid capacity for heat dissipation
- Foam cell compensates for oil expansion as the shock heats up
- Foam cell removes air from the body, so the shock can be mounted at 180 degrees
- Sintered iron piston
- Chrome plated shaft
- Black boot included
- Limited lifetime warranty
Foam cell and mounting angle
The foam cell inside the body is there to take up the room created as the oil expands with heat. When a twin-tube shock works hard on rough trails, the oil warms and the foam compresses, which keeps the damping steady rather than letting the shock lose control. This design matters most on trucks that spend long stretches off road, where a shock can heat up quickly and change its response.
Because the foam cell handles oil expansion, the shock can be mounted at a wider range of angles than many conventional units. Still, check the mount geometry and the clearance to the axle and frame before installing. Wear eye protection when working on any shock under spring load, and replace the bushings if they are cracked or flattened.
- Check the boot for tears before fitting
- Confirm the lift height matches your suspension
- Replace shocks in pairs on the same axle
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | B8556 |
| UPC | 803696238746 |
| Series | Black Max B8500, replacement |
| Position | Front |
| Lift height | 2–2.5 inch |
| Construction | Twin tube |
| Hydraulic / gas charged | Hydraulic |
| Piston | Sintered iron |
| Shaft finish | Chrome plate |
| Boot | Black, included |
| Fitment type | Direct fit |
| Warranty | Limited lifetime |
Vehicle fitment
Skyjacker’s manufacturer fitment covers these vehicles, with trim details omitted: 1966–1979 Ford Bronco; 1975–1977 Ford Bronco Sport; 1970–1976 Ford F-100; 1977–1979 Ford F-150; 1977–1986 Ford F-250; 1979 Ford F-350; 1987–1995 Jeep Wrangler (YJ); 1984–1985 Toyota 4Runner; 1980–1985 Toyota Pickup; and 2005–2018 Toyota Tacoma.
The fitment does not include other Jeep Wrangler generations (TJ, LJ, JK, JL), Ford F-150 models after 1979, or Toyota Tacoma models from 2019 onward. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The foam cell lets this shock be mounted at any angle up to 180 degrees, so it does not need a fixed orientation for oil expansion. Match the 2–2.5 inch lift height to your suspension before installing. Wear eye protection when working on any shock under spring load.
What’s included
A black boot is included with the shock. Check the included parts against your installation before starting.








