Overview
The Skyjacker B8537 is a rear Black MAX shock absorber for 2007–2018 Jeep Wrangler JK models, both two-door and four-door, including Rubicon, Sahara and Sport trims. It is a twin-tube hydraulic replacement with a black boot included and is sold individually.
The B8500 series uses a foam-cell design. As the shock heats, the foam cell compresses, which offsets oil expansion so damping stays steady across temperature changes.
Key features
- Rear-position Black MAX shock for two-door and four-door JK Wranglers
- Vehicle-specific multi-stage valving
- Increased fluid capacity for heat dissipation, per the manufacturer
- Foam-cell design that compresses as the oil heats
- Sintered iron piston and chrome plated shaft
- Built for a 1-3.5 inch lift, with black boot included
Keeping rear shocks working over time
Rear shock damping affects how the axle settles after a bump and how the back of the vehicle reacts to braking and acceleration. On a Wrangler, the rear shocks also help control axle movement on uneven trail sections, where heat can build quickly in the body. Twin tube hydraulic shocks should be checked for leaks at the body and rod seal, since a leak shows that the unit has lost its ability to control motion.
Rubber bushings at each end wear over time and can make a rear shock feel loose even when the body is sound. Check them when the shock is off the vehicle, and replace worn bushings before reinstalling. Bump stops are often inspected at the same time, particularly on a vehicle with a lift, because they limit travel at the end of the stroke.
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | B8537 |
| UPC | 803696238593 |
| Position | Rear |
| Series | Replacement |
| Construction | Twin tube |
| Damping | Hydraulic (gas charged: hydraulic) |
| Piston | Sintered iron |
| Shaft | Chrome plated |
| Valving | Vehicle-specific multi-stage |
| Lift range | 1-3.5 inch |
| Boot | Black boot included |
| Warranty | Limited lifetime warranty |
Vehicle fitment
It fits 2007 to 2018 Jeep Wrangler (JK) models, including the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, along with the Unlimited versions of those trims.
The fit covers 2007 to 2018 JK models. Confirm your year, model and trim before ordering, since Wrangler JL, YJ and TJ models sit outside that range.
Installation notes
The foam-cell body lets the shock be mounted in any direction, per the manufacturer. Set the vehicle lift within the 1-3.5 inch range named for this shock, and support the vehicle securely before removing the factory unit.
What’s included
One rear Black MAX shock absorber with black boot, sold individually.









