Overview
The Skyjacker Black Max B8500 rear shock, part number B8544, is a twin-tube hydraulic rear shock made for the 1999–2004 Jeep Grand Cherokee (WJ). It is made for vehicles with a 2-3 inch lift, includes a black boot and is sold individually.
The B8500 series uses foam-cell technology that compensates for oil expansion as the shock heats up, helping performance stay consistent across a range of temperatures. The foam cell also removes air from the shock body, so it can be mounted 180 degrees or in any direction.
Key features
- Rear shock for vehicles with a 2-3 inch lift
- Vehicle-specific multi-stage valving
- Increased fluid capacity for heat dissipation
- Twin-tube design with a sintered iron piston
- Chrome plate shaft
- Foam-cell technology that allows mounting in any direction
- Black boot included
- Limited lifetime warranty; supplied individually
Choosing a rear shock
A rear shock controls how quickly the axle settles after a bump, so its valving has to match the spring rate, weight and lift of the vehicle. When lift changes, the shock’s length and travel change as well, which is why matching the shock to your lift matters for both ride quality and bottoming out. Twin-tube designs are common for daily use, while remote reservoirs are often chosen for heavier work.
Rear shocks are often replaced in pairs so both sides damp the same way. Old shocks that leak, make knocking sounds or let the rear end bounce after a dip are worth replacing, along with worn bushings at the mounting eyes. After a shock swap, check that the rear axle has room to cycle without touching brake lines or wiring, and recheck the mounting hardware after the first drives.
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | B8544 |
| UPC | 803696238654 |
| Product type | Rear shock absorber |
| Series | Black Max B8500 (Replacement) |
| Position | Rear |
| Shock type | Twin tube, hydraulic |
| Lift height | 2-3 inch lift, with black boot |
| Piston | Sintered iron |
| Shaft | Chrome plate |
| Boot | Black boot included |
| Quantity | Individual (one shock) |
| Warranty | Limited lifetime warranty |
| Fit type | Direct fit |
Vehicle fitment
It is a rear shock made for the 1999–2004 Jeep Grand Cherokee (WJ) in Laredo, Limited, Overland, Special Edition and Sport trims.
It is a rear shock only. Verify the year, model and trim against your vehicle before ordering.
Installation notes
A rear shock works with the rest of the suspension, so professional installation is a sound choice. Use jack stands on flat ground and never rely on a jack alone under the vehicle. Tighten the mounting hardware to specified values and check it again after the first miles. After changing ride height, have the alignment checked and inspect brake lines, cables and wiring for clearance as the axle moves.
What’s included
One rear shock with a black boot.
Not included: A second shock for the other side, front shocks, springs and lift components.









