Overview
The Skyjacker B8575 is a front Black MAX B8500 series shock absorber with a black boot. It fits 2007 to 2018 Jeep Wrangler JK models in both two-door and four-door form, and is designed for a 6 to 7 inch lift.
The foam cell in the body compresses as the oil warms, which keeps the shock performing consistently across temperature ranges. The foam cell also allows mounting in any direction. The design is aimed at strong performance in demanding driving conditions.
Key features
- Vehicle-specific multi-stage valving
- Foam cell for consistent performance across temperatures
- Increased fluid capacity for heat dissipation
- Twin-tube hydraulic design with sintered iron piston
- Chrome-plated shaft
- Black boot included
- Two-door and four-door models
Lift height and shock choice
A lift changes the geometry of the front suspension, so the shock must cover a different range of travel than it would on a stock Wrangler. When the ride height rises, the shock can reach its limits sooner on the way down, and a shock that does not match the lift can feel harsh or lose control at full extension. Matching the shock to the height of the lift is one of the main decisions when setting up a Jeep for trail use.
Once the shock is in, check the bump stops and the upper mounts for clearance through full travel. Inspect the boot after off-road runs, because mud and grit that reach the shaft can damage the seals. Front shocks are usually replaced in pairs, so both sides damp evenly and the steering stays predictable.
- Match shock length to the lift height
- Check bump stop clearance after installing
- Inspect the boot and seals after off-road use
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | B8575 |
| UPC | 803696239408 |
| Shock series | Replacement, Black MAX B8500 series |
| Position | Front |
| Type | Hydraulic, twin tube |
| Lift | 6 to 7 inch lift |
| Models | 2 and 4-door |
| Piston | Sintered iron |
| Shaft | Chrome plate |
| Fitment type | Direct fit |
| Warranty | Limited lifetime warranty |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler (JK), including 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport and Sport S trims, and the Unlimited versions of those trims.
The list does not include the Wrangler YJ, TJ, LJ or JL, or the Gladiator. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the lift on your Wrangler falls within the 6 to 7 inch range, since a mismatch affects ride height and available travel.
What’s included
A single front shock, supplied with its black boot.
Not included: mounting bushings and brackets; check them against your kit before fitting.









