Shock boots keep grit and water off a lifted shock's shaft and seal. How to size, vent and inspect one, when it can trap…
Shock Absorbers
Showing 2641–2652 of 3453 resultsSorted by popularity
-
Shock Absorbers
B8 5100 Series Shock Absorber
- Bilstein B8 5100 Series rear shock absorber, part number 33-253190
- Fit must be confirmed for your vehicle before ordering
- Collapsed length 17.52 in; extended length 28.74 in; travel 11.22 in
- Monotube, zinc plated finish, 46mm ID smooth body, boot included
SKU: BIL33-253190 -
Shock Absorbers
B6 4600 Series Shock Absorber
- Bilstein B6 4600 Series rear shock absorber, part number 33-253183
- Direct fit upgrade to OE shock absorbers on stock height trucks
- Fits 2015 to 2017 and 2015–2018 Ford F-150 trucks
- Monotube, yellow paint finish, no reservoir, boot included
SKU: BIL33-253183 -
Shock Absorbers
B8 5100 Series Shock Absorber
- Bilstein B8 5100 Series rear shock absorber, part number 33-245492
- Fits 2005 to 2009 and 2012 to 2013 Toyota Hi-lux, rear position
- Travel length 8.21 in; collapsed 14.25 in; extended 22.46 in
- Monotube, gas charged, 46mm ID smooth body, boot included
SKU: BIL33-245492 -
Shock Absorbers
Bilstein 5100 Series Shock Absorber – 33-238555
- Fits 2013–2018 Ram 3500 per the manufacturer fitment list (Big Horn, Laramie, SLT, ST and other trims)
- Rear 5100 Series mono tube shock absorber, 46mm smooth body, non-coilover
- Part number 33-238555, direct fit, rated for stock height up to a 1 in. lift
- Collapsed length 18.33 in, extended length 29.88 in, travel length 11.55 in
- Boot included, no reservoir
SKU: BIL33-238555 -
Shock Absorbers
Bilstein 46mm Monotube Shock Absorber – 33-238319
- Fits 2014–2018 Chevrolet Silverado 1500 and GMC Sierra 1500 trucks
- Bilstein 5100 Series rear shock, part number 33-238319
- Direct Fit with lift height w/0-1 in. Lift
- 46mm monotube gas pressure design with independent rebound and compression tuning
- Designed for specific manufacturer lift kits using stock OEM mounting
SKU: BIL33-238319 -
Shock Absorbers
Bilstein 46mm Monotube Shock Absorber – 33-236964
- Bilstein 5100 Series rear shock, part number 33-236964
- Direct Fit with lift height w/3 – 5 in. Lift
- 46mm monotube, smooth body, no reservoir
- Collapsed length 20.28 in. (515 mm), extended 32.01 in. (813 mm)
- No vehicle is named for this part
SKU: BIL33-236964 -
Shock Absorbers
Bilstein 5100 Series Shock Absorber – 33-236957
- Bilstein 5100 Series rear shock absorber, part 33-236957
- Gas charged monotube with a 46mm smooth body (non-coilover)
- Zinc plated steel body with no remote reservoir
- Fitment is not confirmed, so check your vehicle before ordering
SKU: BIL33-236957 -
Shock Absorbers
Bilstein 46mm Monotube Shock Absorber – 33-233970
- Fits 1976-1983 Jeep CJ5 and 1976-1986 Jeep CJ7 models
- Front 46mm monotube shock absorber, 5125 Series
- Gas charged, smooth non-coilover body, no reservoir
- Collapsed length 13.04 in; extended length 20.38 in
- Eye/eye or stem/eye mount options; 5/8 inch hourglass bushings included
SKU: BIL33-233970 -
Shock Absorbers
Bilstein 46mm Monotube Shock Absorber – 33-230450
- Bilstein 33-230450, a 46mm monotube gas-charged shock from the 5125 Series
- Universal fit listing with no vehicle named
- Self-adjusting deflective disc valving on a 46mm piston
- 5/8 inch hour glass bushings
- Eye/eye or stem/eye mount choice
SKU: BIL33-230450 -
-
Shock Absorbers
Bilstein 46mm Monotube Shock Absorber – 33-230436
- Bilstein 33-230436, a 46mm monotube gas-charged shock absorber from the 5125 Series
- Universal fit for custom builds and vehicles without a direct Bilstein fitment
- 46mm piston with self-adjusting deflective disc valving
- Comes equipped with 5/8 inch hour glass bushings
- Eye/eye or stem/eye mount configuration
SKU: BIL33-230436
What a shock absorber does
A shock absorber is a damper. The spring holds the vehicle up, and the shock controls how fast that spring moves. Without working dampers a truck bounces repeatedly after every bump, tires lose contact with the ground, and braking and steering suffer. Off-road, shocks also absorb heat from constant motion, which is why fade becomes a concern on long, rough stretches.
Key specifications to compare
- Collapsed and extended length: These two numbers set the travel (extended minus collapsed). The shock must be long enough that it never limits suspension travel or bottoms out before the bump stops do, and short enough that it is not the first thing to run out at full droop.
- Mounts: Bar pin, stem, eyelet and bolt-in ends are not interchangeable without hardware. Match both the upper and lower mount styles to your vehicle.
- Body design: Monotube shocks usually run cooler and resist foaming better. Twin-tube shocks are common as stock replacements and are often quieter and lower in cost. Many listings state the body diameter, such as a 46mm smooth body.
- Reservoir: An external reservoir adds oil volume and gas capacity, which helps with heat in hard or sustained use.
- Shaft diameter: A larger shaft is generally more resistant to bending.
Choosing for your use
For a daily driver with a modest lift, a quality non-adjustable monotube or gas-charged twin-tube shock sized for your lift height is usually enough. If you tow, carry a heavy bumper and winch, or run fast desert roads, look at larger bodies, reservoirs and tunable valving. Pair the shock with the right spring rate; a shock cannot make up for a spring that is too soft or too stiff for the load.
Fitment and installation
Shocks are specific to lift height, axle and whether they are front or rear, so confirm fitment for your exact year, make and model and check the manufacturer's specifications. Replace shocks in axle sets, since one new and one worn shock gives uneven handling. Support the axle before removal so it cannot droop and stretch brake lines, and tighten fasteners to the specified torque. If you changed ride height, have the alignment checked afterward.
A final point on tuning: if a shock offers adjustable damping, change one setting at a time and note the result on a familiar road. Heavier loads, such as a winch bumper, roof tent or camping gear, often call for firmer valving than an empty truck. Inspect boots, bushings and mounting hardware at every oil change, since a worn bushing can mimic a failing shock.
Mistakes to avoid
The most common error is choosing shocks by brand or price without checking the length numbers. A shock that is too short lets the axle droop until the springs unseat or brake lines tighten, while one that is too long bottoms out and can bend the shaft or damage the mounts. Measure from mount to mount at ride height, then at full droop and full compression, and compare with the listed collapsed and extended lengths.
- Do not ignore worn bushings, since new shocks with tired bushings still clunk.
- Do not use a shock as a travel limiter; bump stops and limit straps do that job.
- Do not install shocks with the vehicle hanging from the frame and the springs unloaded, because mounts then sit in the wrong position.
Test drive on a familiar road after installation and listen for rattles before heading onto the trail.
Related guides
- Shock Boots: Why Every Lifted Shock Needs One
- Jeep JK Lift Heights: 2.5 vs 3.5 vs 4.5 Inch Compared
Jeep JK lift heights compared: the tires 2.5, 3.5 and 4.5-inch lifts clear, the track bars, arms, lines and driveshafts each needs, and which…
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
- Bilstein 5100 vs Fox 2.0 Performance: Which Shock for Your Lifted Truck or Jeep
Bilstein 5100 vs Fox 2.0 Performance: body, shaft, reservoir, travel and lift ratings across 417 part numbers, which trucks and Jeeps both fit, how…
Popular Shock Absorbers brands
- Pro Comp Suspension (898)
- Bilstein (615)
- Rancho (567)
- Fox Racing Shox (345)
- Skyjacker (279)
- Fabtech (232)
- ARB 4x4 Accessories (136)
- FOX (85)
- ICON Vehicle Dynamics (84)
- Rubicon Express (78)
- Icon Suspension (77)
- King Shocks (71)
Shock Absorbers FAQ
How do I know when shocks are worn out?
Common signs are oil leaking down the body, a bouncy or floaty ride, nose dive under braking, uneven tire wear and clunking from the mounts. A worn shock may also feel hot or weak when you compare it with a new one.
What is the difference between monotube and twin-tube shocks?
A monotube has a single working chamber with a floating piston separating oil and gas, which tends to shed heat well. A twin-tube uses an inner and outer tube and is common in factory-style replacements. Both can work well when matched to the vehicle.
Do I need new shocks after a lift?
Usually yes. A lift changes the distance between the mounts, so stock shocks may limit travel or bottom out. Choose shocks whose collapsed and extended lengths suit your lift height, and confirm the specifications with the manufacturer.
Should shocks be replaced in pairs?
Yes, replace both shocks on an axle together. Mixing new and worn dampers makes the two sides react differently, which affects handling and braking stability, especially on rough surfaces.












