Overview
The Bilstein 33-253183 is a B6 4600 Series rear shock absorber for stock height Ford F-150 trucks. Fitment covers 2015 to 2017 F-150 trucks and 2015–2018 F-150 trucks.
The B6 4600 is a direct fit upgrade to OE shock absorbers on stock height light trucks and SUVs. Its monotube body gives consistent, fade free performance, and its velocity sensitive, digressive piston responds to changing road conditions. Each B6 4600 is tuned for its specific application.
Key features
- Direct fit upgrade to OE shock absorbers
- Designed for stock height trucks
- Monotube design
- Velocity sensitive, digressive piston
- 46mm ID smooth body, non-coilover
- Yellow paint finish
- No reservoir
- Boot included
Rear suspension check
The rear shocks on a pickup carry a lot of the load when the bed is full. Over time the piston seals and valving wear, and the truck begins to bounce after bumps or sway on highway curves. Check for oil on the body, a torn boot and loose or cracked mounts during regular service.
Replacing rear shocks is often a good time to check the springs, bushings and bump stops. Worn bushings can make a new shock feel harsh, and a tired spring can let the rear sit low. Tighten the mounts to the values in your service manual, and recheck them after the first few drives.
- Look for oil on the shock body
- Inspect mounts and bushings
- Check the boot for tears
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 33-253183 |
| UPC | 700007952621 |
| Shock series | B6 4600 Series |
| Position | Rear |
| Fitment type | Direct fit |
| Lift height | 0 in. lift/drop (stock height) |
| Body design | 46mm ID smooth body, non-coilover |
| Internal design | Monotube |
| Reservoir | No |
| Finish | Yellow paint |
| Boot included | Yes |
Vehicle fitment
It fits the 2015–2018 Ford F-150 in King Ranch, Lariat, Limited, Platinum, XL and XLT trims.
No other Ford models are covered. Confirm your model year and trim before ordering.
What’s included
Includes one rear shock absorber and its boot.









