Overview
The Bilstein 33-253190 is a B8 5100 Series rear shock absorber with 11.22 in of travel and a 28.74 in extended length. Confirm fit for your vehicle’s year, model and trim before ordering.
The B8 5100 is a monotube shock with a digressive piston that responds to changing road conditions. Its 46mm ID smooth body is non-coilover, it has no reservoir, and it has a zinc plated finish. The unit is rated 0 in. lift/drop and includes a boot.
Key features
- Monotube internal design
- Digressive piston
- 46mm ID smooth body, non-coilover
- Zinc plated finish
- No reservoir
- Rated 0 in. lift/drop
- Boot included
Measuring before you buy
Length measurements are often the most useful guide when a shock has no listed vehicle. Collapsed length is the distance between mounting points with the shock fully compressed, and extended length is the same distance when it is fully stretched. Together with travel, they show how much room the shock needs and how far the suspension can move.
To measure the old shock, remove it and check its eye-to-eye distance in both positions. Mark the readings on paper and compare them with the new unit before ordering. Keep the mounting hardware sizes in mind as well, since a different bushing or stud can change how the shock is seated.
A digressive piston changes its damping force as shaft speed changes, so it can respond differently to small bumps and larger impacts. That behavior suits many road surfaces, though the feel also depends on the rest of the suspension and the tire size.
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 33-253190 |
| UPC | 651860783192 |
| Shock series | B8 5100 Series |
| Position | Rear |
| Collapsed length | 17.52 in |
| Extended length | 28.74 in |
| Travel length | 11.22 in |
| Body design | 46mm ID smooth body, non-coilover |
| Internal design | Monotube |
| Reservoir | No |
| Finish | Zinc plated |
| Lift height | 0 in. lift/drop |
| Boot included | Yes |
Vehicle fitment
Fit depends on your vehicle’s year, model and trim, so confirm those before ordering.
Because no vehicle is named, compare the collapsed length of 17.52 in and extended length of 28.74 in with the shock you are replacing. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One rear shock absorber with a boot.









