Shock boots keep grit and water off a lifted shock's shaft and seal. How to size, vent and inspect one, when it can trap…
Shock Absorbers
Showing 2617–2628 of 3453 resultsSorted by popularity
-
Shock Absorbers
Bilstein 7100 Series Shock Absorber – B46-1361S
- Bilstein B46-1361S, a 7100 Series shock absorber
- Gas charged monotube body with 2-inch shock diameter
- Schrader valve with dividing piston
- Series offered with 8, 10, 12 and 14 in of travel
- No vehicle fitment listed; check manufacturer specifications
SKU: BILB46-1361S -
Shock Absorbers
Bilstein 7100 Series Reservoir Shock Absorber – B46-1103R
- Bilstein B46-1103R, a 7100 Series reservoir shock absorber
- Gas charged construction with 2-inch shock body
- Self-adjusting deflecting disc valving and Schrader valve
- Series offered with 8, 10, 12 and 14 in of travel
- Vehicle fitment not listed; check manufacturer specifications
SKU: BILB46-1103R -
Shock Absorbers
Bilstein 7100 Series Shock Absorber – B46-1085S
- Bilstein B46-1085S, a 7100 Series shock absorber
- Gas charged monotube design with 2-inch shock diameter
- Dividing piston Schrader valve construction
- Series offered with 8, 10, 12 and 14 in of travel
- Vehicle fitment not listed; review manufacturer specs
SKU: BILB46-1085S -
Shock Absorbers
Bilstein 7100 Series Shock Absorber – B46-0350S
- Bilstein B46-0350S, a 7100 Series shock absorber
- Gas charged monotube construction with 2-inch shock body
- Schrader valve with dividing piston
- Series offered with 8, 10, 12 and 14 in of travel
- Vehicle fitment not listed; check manufacturer specifications
SKU: BILB46-0350S -
Shock Absorbers
Bilstein 4600 Series Shock Absorber – B46-0056
- Bilstein B46-0056 rear shock absorber, 4600 Series
- Gas charged monotube design
- Position: Rear; sold individually
- Rubber bushings and blue boot included
- Part number B46-0056; UPC 790832526778
- No vehicle fitment listed; Direct Fit label only
SKU: BILB46-0056 -
Shock Absorbers
Bilstein 7100 Series Reservoir Shock Absorber – AK7114SB06
- Bilstein AK7114SB06, a gas-charged 7100 Series reservoir shock absorber
- Monotube gas pressure construction with Schrader valve and dividing piston
- Optional remote reservoir; 2 in shock body
- Series travel options: 8, 10, 12 and 14 in
- Fitment is universal; no vehicle years are named
SKU: BILAK7114SB06 -
Shock Absorbers
Bilstein 7100 Series Reservoir Shock Absorber – AK7114SB05
- Bilstein AK7114SB05, a 7100 Series reservoir shock absorber
- Gas charged monotube construction with Schrader valve fitment
- Optional remote reservoir; 2 in shock body
- Series travel options: 8, 10, 12 and 14 in
- Fitment field reads universal; no specific years or models given
SKU: BILAK7114SB05 -
-
Shock Absorbers
Bilstein 7100 Series Reservoir Shock Absorber – AK7114R06
- Bilstein AK7114R06, a 7100 Series reservoir shock absorber
- Gas charged construction with 2-inch shock body
- Schrader valve with dividing piston
- Series offered with 8, 10, 12 and 14 in of travel
- Universal fit label; no vehicle attached, so confirm before ordering
SKU: BILAK7114R06 -
Shock Absorbers
Bilstein 7100 Series Reservoir Shock Absorber – AK7112SBA
- Bilstein AK7112SBA, a gas-charged 7100 Series reservoir shock absorber
- Monotube gas pressure construction with Schrader valve fitment
- 2 in shock body with high-flow piston and choice of valvings
- Series travel options: 8, 10, 12 and 14 in
- Universal fit label; no vehicle is matched
SKU: BILAK7112SBA -
Shock Absorbers
Bilstein 7100 Series Reservoir Shock Absorber – AK7112SB06
- Bilstein AK7112SB06, a 7100 Series reservoir shock absorber
- Gas charged monotube design with Schrader valve and dividing piston
- Available with or without a remote reservoir; 2 in shock body
- Series travel options: 8, 10, 12 and 14 in
- Bilstein describes fitment as universal; no specific vehicles are named
SKU: BILAK7112SB06 -
Shock Absorbers
Bilstein 7100 Series Shock Absorber – AK7112S03
- Bilstein AK7112S03, a 7100 Series gas charged shock absorber
- Monotube body with 2-inch shock diameter and self-adjusting deflecting disc valving
- Owner rebuildable design with Schrader valve and dividing piston
- Series offered with 8, 10, 12 and 14 in of travel
- Universal fit label; match mounting and travel to your vehicle
SKU: BILAK7112S03
What a shock absorber does
A shock absorber is a damper. The spring holds the vehicle up, and the shock controls how fast that spring moves. Without working dampers a truck bounces repeatedly after every bump, tires lose contact with the ground, and braking and steering suffer. Off-road, shocks also absorb heat from constant motion, which is why fade becomes a concern on long, rough stretches.
Key specifications to compare
- Collapsed and extended length: These two numbers set the travel (extended minus collapsed). The shock must be long enough that it never limits suspension travel or bottoms out before the bump stops do, and short enough that it is not the first thing to run out at full droop.
- Mounts: Bar pin, stem, eyelet and bolt-in ends are not interchangeable without hardware. Match both the upper and lower mount styles to your vehicle.
- Body design: Monotube shocks usually run cooler and resist foaming better. Twin-tube shocks are common as stock replacements and are often quieter and lower in cost. Many listings state the body diameter, such as a 46mm smooth body.
- Reservoir: An external reservoir adds oil volume and gas capacity, which helps with heat in hard or sustained use.
- Shaft diameter: A larger shaft is generally more resistant to bending.
Choosing for your use
For a daily driver with a modest lift, a quality non-adjustable monotube or gas-charged twin-tube shock sized for your lift height is usually enough. If you tow, carry a heavy bumper and winch, or run fast desert roads, look at larger bodies, reservoirs and tunable valving. Pair the shock with the right spring rate; a shock cannot make up for a spring that is too soft or too stiff for the load.
Fitment and installation
Shocks are specific to lift height, axle and whether they are front or rear, so confirm fitment for your exact year, make and model and check the manufacturer's specifications. Replace shocks in axle sets, since one new and one worn shock gives uneven handling. Support the axle before removal so it cannot droop and stretch brake lines, and tighten fasteners to the specified torque. If you changed ride height, have the alignment checked afterward.
A final point on tuning: if a shock offers adjustable damping, change one setting at a time and note the result on a familiar road. Heavier loads, such as a winch bumper, roof tent or camping gear, often call for firmer valving than an empty truck. Inspect boots, bushings and mounting hardware at every oil change, since a worn bushing can mimic a failing shock.
Mistakes to avoid
The most common error is choosing shocks by brand or price without checking the length numbers. A shock that is too short lets the axle droop until the springs unseat or brake lines tighten, while one that is too long bottoms out and can bend the shaft or damage the mounts. Measure from mount to mount at ride height, then at full droop and full compression, and compare with the listed collapsed and extended lengths.
- Do not ignore worn bushings, since new shocks with tired bushings still clunk.
- Do not use a shock as a travel limiter; bump stops and limit straps do that job.
- Do not install shocks with the vehicle hanging from the frame and the springs unloaded, because mounts then sit in the wrong position.
Test drive on a familiar road after installation and listen for rattles before heading onto the trail.
Related guides
- Shock Boots: Why Every Lifted Shock Needs One
- Jeep JK Lift Heights: 2.5 vs 3.5 vs 4.5 Inch Compared
Jeep JK lift heights compared: the tires 2.5, 3.5 and 4.5-inch lifts clear, the track bars, arms, lines and driveshafts each needs, and which…
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
- Bilstein 5100 vs Fox 2.0 Performance: Which Shock for Your Lifted Truck or Jeep
Bilstein 5100 vs Fox 2.0 Performance: body, shaft, reservoir, travel and lift ratings across 417 part numbers, which trucks and Jeeps both fit, how…
Popular Shock Absorbers brands
- Pro Comp Suspension (898)
- Bilstein (615)
- Rancho (567)
- Fox Racing Shox (345)
- Skyjacker (279)
- Fabtech (232)
- ARB 4x4 Accessories (136)
- FOX (85)
- ICON Vehicle Dynamics (84)
- Rubicon Express (78)
- Icon Suspension (77)
- King Shocks (71)
Shock Absorbers FAQ
How do I know when shocks are worn out?
Common signs are oil leaking down the body, a bouncy or floaty ride, nose dive under braking, uneven tire wear and clunking from the mounts. A worn shock may also feel hot or weak when you compare it with a new one.
What is the difference between monotube and twin-tube shocks?
A monotube has a single working chamber with a floating piston separating oil and gas, which tends to shed heat well. A twin-tube uses an inner and outer tube and is common in factory-style replacements. Both can work well when matched to the vehicle.
Do I need new shocks after a lift?
Usually yes. A lift changes the distance between the mounts, so stock shocks may limit travel or bottom out. Choose shocks whose collapsed and extended lengths suit your lift height, and confirm the specifications with the manufacturer.
Should shocks be replaced in pairs?
Yes, replace both shocks on an axle together. Mixing new and worn dampers makes the two sides react differently, which affects handling and braking stability, especially on rough surfaces.















