Overview
The Bilstein 33-233970 is a front 46mm monotube shock absorber from the 5125 Series for custom suspension builds. It fits 1976-1983 Jeep CJ5 and 1976-1986 Jeep CJ7 vehicles.
The 5125 line suits vehicles without a direct Bilstein fit. This shock uses high gas pressure, a 46mm piston with self-adjusting deflective disc valving, and a zinc plated finish. Several lengths and valve rates are available across the line, and this part is one configuration.
Key features
- 46mm piston with self-adjusting deflective disc valving
- High gas pressure monotube body, gas charged
- Smooth body design, non-coilover, with no reservoir
- Zinc plated finish
- Includes 5/8 inch hourglass bushings
- Eye/eye or stem/eye mount configurations available in the 5125 line
- Designed for custom applications and vehicles without a direct Bilstein fit
Mounts and lift considerations
The 5125 line is built for custom work, so the mount style and lift range need to be decided before the shock is ordered. Eye/eye and stem/eye options suit different bracket layouts, and a mismatch can cause binding or early bushing wear. Gas-charged damping gives a firm, consistent feel when the suspension is working through its travel.
Plan the installation around measured dimensions rather than estimates. Check that the lift height falls within the rated range, then confirm the collapsed and extended lengths allow full suspension travel without bottoming out. Inspect the bushings after the first off-road outing to confirm they are seated and not pinched.
- Confirm eye/eye or stem/eye style
- Measure collapsed length at installed height
- Check travel before bottoming out
- Inspect bushings after the first outing
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 33-233970 |
| UPC | 651860729398 |
| Series | 5125 Series |
| Position | Front |
| Body design | Smooth body (non-coilover) |
| Body diameter | 46mm |
| Gas charged | Yes |
| Reservoir | No |
| Collapsed length | 13.04 in (331.3 mm) |
| Extended length | 20.38 in (517.7 mm) |
| Finish | Zinc plated |
| Bushings | 5/8 inch hourglass |
| Compression | Measured at 0.52 m/s; no value given |
| Rebound | 2500 at 0.52 m/s |
| Lift height | 0 to 1 in lift |
Vehicle fitment
The shock fits 1976-1983 Jeep CJ5 and 1976-1986 Jeep CJ7 models, labeled 76-86 CJ5 Wrangler and 76-86 CJ7 Wrangler.
The Wrangler name refers to the 1976-1986 CJ line. Later Wrangler models, including YJ, TJ, LJ, JK and JL, are not covered. CJ5 coverage stops at 1983, the last year of that model. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The 5125 line is offered in eye/eye and stem/eye mount configurations, so check that the mounts on your shock match your existing hardware before installation. The listed lift range is 0 to 1 in, so confirm your lift height first. Gas-charged shocks are pressurized; do not heat, puncture or disassemble the body.
What’s included
Industry standard 5/8 inch hourglass bushings are included. Check the mounting hardware you need against your installation before starting.









