Shackle Reversal Kits
Showing 13–24 of 36 resultsSorted by popularity
-
Shackle Reversal Kits
Daystar 0 Inch Lift Greasable Super Shackles – KJ61015BK
- Stock-height (0 inch lift) front shackle set for the 1987–1995 Jeep Wrangler (YJ)
- Greasable with rifle drilled bolts included
- Sold as a pair with black polyurethane bushings
- Zinc plated finish and limited lifetime warranty
SKU: DAYKJ61015BK -
Shackle Reversal Kits
Daystar 1.25 Inch Greasable Super Shackles – KJ61013BK
- Rear shackles for the 1987–1995 Jeep Wrangler (YJ)
- 1.25 inch (1-1/4 inch) lift, sold as a pair
- Greasable kit with replacement bushings, sleeves and rifle drilled bolts
- Fully welded round tube with zinc plated finish
SKU: DAYKJ61013BK -
Shackle Reversal Kits
Daystar 0.5 Inch Lift Greasable Super Shackles – KJ61010BK
- Fits the 1987–1995 Jeep Wrangler (YJ) across several trims
- 0.5 inch (1/2 inch) front lift, greasable, sold as a pair
- Rifle drilled greasable bolts and black polyurethane bushings included
- Zinc plated finish and limited lifetime warranty
SKU: DAYKJ61010BK -
Shackle Reversal Kits
Daystar 1.5 Inch Lift Greasable Super Shackles – KJ61007BK
- Rear position, 1.5 inch (1-1/2 inch) lift
- Fits 1976–1983 Jeep CJ5, 1976–1986 CJ7 and 1981–1985 Jeep Scrambler
- Greasable with black polyurethane bushings and rifle drilled bolts
- Zinc plated, sold as a pair, limited lifetime warranty
SKU: DAYKJ61007BK -
Shackle Reversal Kits
Daystar 0.5 Inch Lift Greasable Super Shackles – KJ61004BK
- Fits 1976–1983 Jeep CJ5, 1976–1986 CJ7 and 1981–1985 Jeep Scrambler
- 0.5 inch (1/2 inch) front lift, sold as a pair
- Greasable with black polyurethane bushings and rifle drilled bolts
- Zinc plated finish and limited lifetime warranty
SKU: DAYKJ61004BK -
Shackle Reversal Kits
Daystar 2.25 Inch Lift Greasable Super Shackles – KJ61003BK
- Fits 1959–1960 and 1966–1975 Jeep CJ5 (Base, Renegade), plus Willys CJ-3 and CJ-5
- 2-1/4 inch (2.25 inch) lift, front position
- Greasable with black polyurethane bushings and rifle drilled bolts
- Sold as a pair, zinc plated, limited lifetime warranty
SKU: DAYKJ61003BK -
Shackle Reversal Kits
Daystar 1.25 Inch Lift Greasable Super Shackles – KJ61002BK
- Fits Jeep CJ3, CJ5, CJ5A, CJ6 and CJ6A, plus Willys CJ-2 through CJ-6 models
- Lift height of 1.25 inch or 1-1/2 inch, so confirm before ordering
- Greasable kit with bushings, sleeves and rifle drilled bolts
- Zinc plated, fully welded round tube, sold as a pair
SKU: DAYKJ61002BK -
Shackle Reversal Kits
Daystar 0.5 Inch Lift Greasable Super Shackles – KJ61001BK
- Fits 1959–1960 and 1966–1975 Jeep CJ5 (Base, Renegade), plus Willys CJ-3 and CJ-5
- 0.5 inch lift, greasable, sold as a pair
- Black grease grooved polyurethane bushings and rifle drilled greasable bolts included
- Fully welded round tube, zinc plated finish
SKU: DAYKJ61001BK -
Shackle Reversal Kits
Daystar 0.5 Inch Lift Greasable Super Shackles – KJ60010
- Fits 1987–1995 Jeep Wrangler (YJ) models
- 0.5 inch front lift, sold as a pair, part number KJ60010
- Heavy-duty plate steel with a fully welded center bar, zinc plated
- Greasable bolts and bushings are not included
SKU: DAYKJ60010 -
Shackle Reversal Kits
Daystar 2.25 Inch Lift Non-Greaseable Super Shackles – KJ60009
- Daystar KJ60009 non-greaseable rear super shackle with 2.25 inch lift, sold in pairs
- Keeps the factory bushings; no hardware included
- Zinc-plated finish
- Fits 1976–1983 Jeep CJ5, 1976–1986 Jeep CJ7 and 1981–1985 Jeep Scrambler
SKU: DAYKJ60009 -
Shackle Reversal Kits
Daystar 1.5 Inch Lift Greasable Super Shackles – KJ60006
- Fits 1976–1986 Jeep CJ5, CJ7 and Scrambler models, front position
- 1.5 inch lift with a greasable design
- Heavy-duty plate steel with a fully welded center bar
- Greasable bolts and bushings not included
- Part number KJ60006, sold in pairs
SKU: DAYKJ60006 -
Shackle Reversal Kits
Daystar 0.5 Inch Lift Greasable Super Shackles – KJ60005
- Fits 1976–1986 Jeep CJ5, CJ7 and Scrambler models, rear position
- 0.5 inch lift with a greasable design
- Heavy-duty plate steel with a fully welded center bar
- Greasable bolts and bushings not included
- Part number KJ60005, sold in pairs
SKU: DAYKJ60005
What a spring shackle does
A leaf spring's rear (and sometimes front) eye attaches to the frame through a shackle, a swinging link that lets the spring change length as the axle moves. Shackle length and angle affect ride height, wheel travel, and how the spring behaves under load.
A longer shackle raises the vehicle slightly and softens the spring rate, while a reversal places the shackle at the front of the spring, which changes how the axle reacts to bumps and braking.
Shackle reversal explained
On a standard layout the shackle sits at the rear of the front spring. Reversing it, so the fixed end sits at the rear, is meant to improve the way the axle moves up and back over obstacles, and many owners report better ride on the trail. Kits typically include new brackets, shackles, and hardware.
Some kits are bolt-on and need no welding, while others require cutting or welding frame hardware, so read the product details first.
Choosing the right shackle
- Greasable vs non-greaseable: Greasable shackles allow lubrication of the bushings, which helps reduce squeaks and wear.
- Lift amount: Choose a length that matches your lift goals, and compare with the spring arch and shock length.
- Width: Shackles come in narrow and wide versions to fit the spring pack and frame brackets.
- Material: Look at fully welded tubing, zinc plating, and polyurethane or rubber bushings.
Installation and driveline
Support the frame on jack stands and the axle on a jack before removing hardware. Replace worn bolts and bushings with the new ones, and torque everything to specification with the vehicle at ride height. Changing shackle length alters pinion angle, brake line length, and driveline angles, so check them. Suspension changes affect handling and safety, so consider professional installation and an alignment check. Confirm fitment for your exact year, make, and model.
Before you start
Inspect the frame brackets, spring eyes, and bolts for cracks and wear, since fresh shackles will not help if the mounts are failing. Measure the existing shackle length and note the spring eye diameter and bolt size so the new parts match.
Plan for the related changes: shocks, bump stops, sway bar links, and the track bar may need to be adjusted when ride height changes. After the first drive, retorque the shackle bolts, since bushings settle. Grease greasable shackles at regular intervals and after water crossings.
Greasable shackles use drilled bolts with a grease fitting, so a grease gun can push lubricant into the bushing. Polyurethane bushings benefit from regular grease and can squeak if dry, while rubber bushings are quieter but may wear faster under hard use. Choose based on how the vehicle is driven.
Shackle width must match the spring eye and the shackle brackets. A narrow shackle on a wide spring pack, or the reverse, will bind. Lift shackles can also change the spring angle, so avoid stacking too much lift in one place without checking the other parts of the suspension.
Plan on retorquing all hardware after a few miles, and inspect the shackles after hard trail use. Bent shackles, cracked welds, and elongated holes are signs to replace parts immediately.
Popular Shackle Reversal Kits brands
- Daystar (16)
- Rubicon Express (11)
- Trail Gear (5)
- Pro Comp Suspension (1)
- Warrior (1)
- Mountain Off Road Enterprises (1)
- Fabtech (1)
Shackle Reversal Kits FAQ
What is a shackle reversal?
It means relocating the shackle from the rear of a spring to the front, so the spring's fixed mount sits behind the shackle. The aim is smoother axle motion over bumps. Kits include the brackets and hardware.
Do I need greasable shackles?
They are not required, but they let you lubricate the bushings and bolts, which reduces noise and wear. Non-greaseable versions are simpler but may need replacement sooner in dirty or wet conditions.
Will longer shackles lift my Jeep?
A little. A longer shackle raises ride height by the amount stated for each product. Extra lift can change pinion angle and brake lines, so check driveline geometry afterward.
Is welding required for a reversal kit?
Some kits are bolt-on and need no welding, while others call for welding or cutting. The listing and the instructions say which. If welding is needed, a qualified fabricator is advisable.











