Overview
The Daystar KJ61013BK is a 1.25 inch lift rear greasable Super Shackle set, sold as a pair, for the 1987–1995 Jeep Wrangler (YJ). The title and highlights agree on the lift, which is 1.25 inch, written as 1-1/4 inch in the highlights.
In this greasable version, Daystar uses black grease grooved polyurethane bushings and rifle drilled greasable bolts. The kit also includes replacement bushings, sleeves and a grease zerk. The shackles are a fully welded round tube with a zinc plated finish.
Daystar also offers stock replacement and taller shackles under other part numbers. Taller versions reach up to 2-1/2 inch of lift. Choose this rear 1.25 inch version when that lift height matches your plan.
Key features
- 1.25 inch (1-1/4 inch) lift, rear position
- Black grease grooved polyurethane bushings
- Rifle drilled greasable bolts included
- Grease zerk for servicing
- Fully welded round tube
- Zinc plated finish
- Limited lifetime warranty
Rear lift on a YJ
Rear shackles set how the rear axle sits under the spring and how the leaf pack moves through its travel. On a YJ, a shackle change affects the driveline angle and can alter how the rear end handles bumps. Check the driveline and brake hose after installation.
Rear shackles are often replaced alongside the bump stops and u-bolts, since those parts share the load and wear together. Inspect the spring eyes for cracks, and replace worn bushings before they allow excess play in the axle. Keeping the joints greased extends their service life.
Choosing between stock replacement and a taller lift depends on how the Wrangler is used, so decide on the height before ordering rather than after the install.
- Inspect spring eyes and shackle plates for cracks
- Check bump stops for compression wear
- Recheck U-bolt torque after the first drives
Specifications
| Brand | Daystar |
|---|---|
| Part number | KJ61013BK |
| UPC | 814423011174 |
| Lift height | 1.25 inch (1-1/4 inch) |
| Bushings | Black grease grooved polyurethane |
| Bolts | Rifle drilled, greasable, included |
| Construction | Fully welded round tube |
| Finish | Zinc plated |
| Location | Rear |
| Position | Rear |
| Quantity | Sold as a pair |
| Warranty | Limited lifetime |
Vehicle fitment
It fits the Wrangler YJ, model years 1987 through 1995, across Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims.
The TJ, LJ, JK and JL Wrangler generations and the Cherokee XJ are not included in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A rear lift changes driveline angles, so check them once the new shackles are in place. Grease the joints through the zerk after installation. Support the axle on jack stands before removing the factory shackles.
What’s included
The greasable kit includes replacement bushings, sleeves, and rifle drilled bolts with a grease zerk. The shackles are sold as a pair.









