Overview
The Daystar KJ61007BK is a 1.5 inch lift greasable Super Shackle, sold as a pair, for the rear of Jeep CJ5, CJ7 and Scrambler vehicles. It fits the 1976–1983 Jeep CJ5, the 1976–1986 Jeep CJ7 and the 1981–1985 Jeep Scrambler.
Each greasable kit combines black grease grooved polyurethane bushings with replacement sleeves and rifle drilled bolts. The grease zerk gives an accessible point for servicing the greasable joints. The shackles are zinc plated.
The Super Shackle line is built for heavy use, and the wider range includes versions reaching up to 2-1/2 inch of lift. Confirm the lift height and fitment against your build before choosing this rear model.
Key features
- 1.5 inch (1-1/2 inch) lift, rear position
- Black grease grooved polyurethane bushings
- Rifle drilled greasable bolts
- Replacement sleeves included with the greasable kit
- Zinc plated finish
- Limited lifetime warranty
- Sold as a pair
Things to check
A rear lift affects the driveline more than a front lift does, because the pinion angle changes as the axle moves. Check the driveshaft for vibration after installation, and inspect the u-joints for play before they are next put under load.
Rear shackles carry the axle’s weight through the spring, so the leaf pack, spring eyes and mounting bolts all share the load. Inspect these parts while the axle is supported. Consider replacing the rear bump stops if the new height changes how the body sits over the axle.
Greasable bolts and bushings keep friction low, which helps the spring move freely, but they still need periodic grease and inspection.
- Inspect u-joints and driveshaft for vibration
- Check leaf spring eyes for cracks
- Re-torque shackle bolts after the first drive
Specifications
| Brand | Daystar |
|---|---|
| Part number | KJ61007BK |
| UPC | 814423011082 |
| Lift height | 1.5 inch (1-1/2 inch) |
| Bushings | Black grease grooved polyurethane |
| Bolts | Rifle drilled, greasable, included |
| Finish | Zinc plated |
| Location | Rear |
| Position | Rear |
| Quantity | Sold as a pair |
| Warranty | Limited lifetime |
Vehicle fitment
It fits the 1976–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited and Renegade), the 1976–1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade), and the 1981–1985 Jeep Scrambler (Base, Laredo, Renegade, SL and SR).
The 1959–1975 CJ5 years, the Wrangler and the Cherokee are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A rear lift changes driveline angles, so check them after the shackles are installed. Support the axle securely on stands before removing the factory shackles.
What’s included
The greasable kit includes replacement bushings, sleeves, and rifle drilled bolts with a grease zerk. The shackles come as a pair.
















