Select your vehicle

Daystar 0 Inch Lift Greasable Super Shackles – KJ61015BK

Daystar

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Stock-height (0 inch lift) front shackle set for the 1987–1995 Jeep Wrangler (YJ)
  • Greasable with rifle drilled bolts included
  • Sold as a pair with black polyurethane bushings
  • Zinc plated finish and limited lifetime warranty

Description

Overview

The Daystar KJ61015BK is a stock-height greasable Super Shackle set, sold as a pair, for the front of the 1987–1995 Jeep Wrangler (YJ). It is a 0 inch lift, so it keeps the factory ride height.

The greasable build uses black grease grooved polyurethane bushings, replacement sleeves and rifle drilled bolts with a grease zerk. It has a fully welded round tube and a zinc plated finish.

Daystar builds its Super Shackles for off-road use, with more strength than factory stamped shackles. Taller versions in the line reach up to 2-1/2 inch of lift, which this stock-height model does not provide.

Key features

  • Stock suspension height, 0 inch lift
  • Greasable design with a grease zerk
  • Black grease grooved polyurethane bushings
  • Rifle drilled greasable bolts included
  • Fully welded round tube
  • Zinc plated finish
  • Limited lifetime warranty

Staying at stock height

A stock-height shackle keeps the front ride height the same as the factory setup, so the suspension geometry stays close to original. It suits owners who want a fresh greasable joint without changing how the Wrangler sits or the driveline angles.

Replacing worn shackles with new ones restores the spring movement and can tighten up a loose front end. Check the frame brackets and spring eyes while the old parts are off, and grease the bushings through the zerk after the new set is installed.

Keep spare grease and a grease gun on hand for periodic service, since greasable joints wear more slowly when they are maintained.

  • Compare the old shackle height before removing it
  • Inspect frame brackets and spring eyes
  • Grease the zerk after installation

Specifications

Brand Daystar
Part number KJ61015BK
Lift height 0 inch (stock height)
Bushings Black grease grooved polyurethane
Bolts Rifle drilled, greasable, included
Construction Fully welded round tube
Finish Zinc plated
Position Front
Quantity Sold as a pair
Warranty Limited lifetime

Vehicle fitment

Wrangler YJ coverage runs 1987 through 1995 and includes Sport, Sahara, SE, S, Rio Grande, Renegade, Laredo, Islander and Base trims.

This is first-generation Wrangler YJ only. The TJ, LJ, JK and JL Wranglers and the Cherokee XJ are not on the list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Support the front axle on jack stands before removing the factory shackles. Grease the bushings and bolts through the zerk after installation, as the greasable design allows.

What’s included

The greasable kit includes black bushings, sleeves and rifle drilled bolts with a grease zerk. The set is sold as a pair.

SKU: DAYKJ61015BK Category:

Specification

Shipping weight 9.00 lbs
Package dimensions 10.00 × 6.00 × 4.00 in
brands

Fitment

VehicleYearsTrims
Jeep Wrangler (YJ)1987–1995Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara, Sport

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the Daystar KJ61015BK change ride height?

No. It has a 0 inch lift and a stock suspension design, so it is meant to keep the factory front ride height on the Wrangler YJ.

Which vehicles does this front shackle fit?

It fits the 1987–1995 Jeep Wrangler (YJ) across Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims. Confirm your vehicle's year, model and trim before ordering.

Is there a UPC for the Daystar KJ61015BK?

No UPC is available for this part. Use part number KJ61015BK to identify it when you compare it with Daystar's other shackle versions, since the part number is the reliable match.

Do stock-height shackles need greasing?

Yes. Greasable shackles need periodic lubrication, just like any other pivot. Grease the zerk at regular intervals, and check for dirt packed into the sleeves. Dry joints wear faster and can squeak.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon