Overview
The Daystar KJ61004BK is a 0.5 inch lift greasable Super Shackle set, sold as a pair, for the front of Jeep CJ5, CJ7 and Scrambler vehicles. It fits the 1976–1983 Jeep CJ5, the 1976–1986 Jeep CJ7 and the 1981–1985 Jeep Scrambler.
The shackles use black grease grooved polyurethane bushings and carry a zinc plated finish. Each greasable kit includes replacement bushings, sleeves, and rifle drilled bolts, with an easy-to-access grease zerk for servicing the joints.
These shackles are built stronger than factory parts. Daystar also offers stock replacement versions and versions with up to 2-1/2 inch of lift, making this 0.5 inch model the lowest-lift choice in the range.
Key features
- 0.5 inch (1/2 inch) lift for the front
- Greasable design with a grease zerk
- Black grease grooved polyurethane bushings
- Rifle drilled bolts included
- Fully welded round tube
- Zinc plated finish
- Limited lifetime warranty
Why upgrade front shackles
Front shackles affect the front suspension’s ride and steering feel. Worn shackles can allow the axle to shift under braking and acceleration, which makes the vehicle wander. Replacing them with greasable parts gives a serviceable joint that can be kept clean and tight over time.
Front lifts change the driveline and steering geometry, so the tie rod, drag link and driveshaft angles are worth checking afterward. Keep the frame and axle supported while the old shackles come out, and inspect the frame bracket for cracks or wear before bolting the new set in place.
A stock-height replacement and a lift version serve different goals, so decide whether you need the factory height back or want a small change first.
- Check steering alignment after installation
- Inspect frame brackets for cracks
- Grease the joints before the first trail run
Specifications
| Brand | Daystar |
|---|---|
| Part number | KJ61004BK |
| UPC | 814423011068 |
| Lift height | 0.5 inch (1/2 inch) |
| Bushings | Black grease grooved polyurethane |
| Bolts | Rifle drilled, greasable, included |
| Construction | Fully welded round tube |
| Finish | Zinc plated |
| Location | Front |
| Position | Front |
| Quantity | Sold as a pair |
| Warranty | Limited lifetime |
Vehicle fitment
Daystar lists KJ61004BK for the 1976–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited and Renegade), the 1976–1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade), and the 1981–1985 Jeep Scrambler (Base, Laredo, Renegade, SL and SR).
The 1959–1975 CJ5 years, the Wrangler and the Cherokee are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A front shackle lift changes driveline angles and steering alignment, so have both checked after installation. Support the frame or axle on stands before removing the old shackles.
What’s included
The greasable kit includes replacement bushings, sleeves, and rifle drilled bolts with a grease zerk. The shackles are sold as a pair.
















