Overview
The Daystar KJ60009 is a non-greaseable rear super shackle with a 2.25 inch lift, made for the 1976–1983 Jeep CJ5, the 1976–1986 Jeep CJ7 and the 1981–1985 Jeep Scrambler.
This non-greaseable version keeps the factory bushings and comes without hardware, which Daystar notes for this model. Both versions in the Daystar line use a zinc-plated finish, and this pair is sold as a set of two shackles.
Key features
- Rear-position shackle with 2.25 inch lift
- Non-greaseable design with factory bushings kept
- Zinc-plated finish
- Sold in pairs
- Fits the 1976–1983 CJ5, 1976–1986 CJ7 and 1981–1985 Scrambler
Before you buy
A super shackle replaces the factory rear shackle and changes how the leaf spring pivots, so it alters the geometry the axle works within. Pairing this kind of part with a check of pinion angle, driveline angles and alignment is common, since the new position changes how the axle sits under the body. Shackles are often inspected at the same time as the leaf springs, bushings and U-bolts, because worn parts left in place can shift the new setup.
Non-greaseable shackles keep the factory bushings, so they suit owners who want a simple swap and do not plan to service joints through a grease zerk. Before ordering, compare the bushing type you are replacing and decide whether ongoing lubrication matters for your use.
- Check the leaf springs and U-bolts while the shackles are out
- Plan for a driveline and alignment check after installation
- Replace worn bushings when they show play or squeaking
Specifications
| Brand | Daystar |
|---|---|
| Part number | KJ60009 |
| UPC | 814423011280 |
| Product type | Super shackle (non-greaseable) |
| Lift height | 2.25 inch |
| Position | Rear |
| Bushings | Factory bushings retained |
| Hardware | Not included |
| Finish | Zinc plated |
| Quantity | Sold in pairs |
| Vehicle application | 1976–1983 Jeep CJ5 (Base, Golden Eagle, Laredo, Limited, Renegade); 1976–1986 Jeep CJ7 (Base, Golden Eagle, Golden Hawk, Laredo, Limited, Renegade); 1981–1985 Jeep Scrambler (Base, Laredo, Renegade, SL, SR) |
Vehicle fitment
It fits the 1976–1983 Jeep CJ5, 1976–1986 Jeep CJ7 and 1981–1985 Jeep Scrambler in the trims covered for each model.
Jeep CJ3 and CJ models before 1976, plus front shackles, are not covered by this rear part. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A 2.25 inch rear lift changes axle angle and driveline geometry, so have the driveline angles and alignment checked after installation.
What’s included
Each pair ships without hardware, and the factory bushings stay in place.









